TYTAN PEX Press elbow 90° - 16x16
Code: PEX-TYT-Z.K16Product detailed description
This 90° elbow keeps the pipe diameter unchanged on both sides – 16 mm in, 16 mm out – so it's the fitting to reach for wherever a 16 mm branch line needs to turn a corner without stepping down or up in size. At 16 mm it's the smallest size in the TYTAN press range, most often used on single-fixture branch runs off a manifold or on underfloor heating loop connections, where a compact, low-profile fitting matters.
The body is nickel-plated brass, pressed with a standard PEX jaw and sleeve to give a permanent, leak-tight joint once crimped – no threads, no solvent, no open flame. Hydroland backs the fitting with a 10-year warranty.
- Type: 90° elbow, press connection
- Ends: 16 mm PEX x 16 mm PEX
- Body material: nickel-plated brass
- Net weight: 0.080 kg
- Warranty: 10 years
Additional parameters
| Category: | Press fittings PEX/AL/PEX |
|---|---|
| Warranty: | 2 roky |
| Weight: | 0.08 kg |
| EAN: | 5900308749623 |
| Prevedenie: | Koleno 90° |
| Spôsob spojenia: | Lisovanie (press-fit) |
| Rozmer: | PEX 16 mm x PEX 16 mm |
| Materiál: | Poniklovaná mosadz |
| Hmotnosť: | 0,080 kg |
| Záruka výrobcu: | 10 rokov |
| Kód výrobcu: | PEX-TYT-Z.K16 |
Discussion
Be the first who will post an article to this item!