Wholesale e-shop

DAB.GENIX VT - automatic pumping stations



Use is necessary whenever the waste water from the toilet, shower, sink or bidet cannot be drained by gravity. These pumping stations can be installed wherever they are needed during new installations or constructions, renovations or structural modifications. GENIX 010 has the facility to connect one fitting such as a washbasin; GENIX 030 allows the connection of up to three fittings, even with a low drain such as a shower, bidet or bath. Our models offer quiet operation and reliable performance thanks to a powerful motor that allows working with temperatures up to 90 °C. Extremely easy to maintain in the event of a blockage or blockage of the motor, with the possibility of dismantling the motor assembly fixed with just two screws and with a drain cock that allows clean and trouble-free maintenance. Check valves are integrated in the inlet manifold and the model 130 in the lower side inlets. An audible alarm and adapter pipe are available as accessories to adapt GENIX to the vast majority of existing installations.

  • Flow rate Qmax: 5.7 m³/h
  • Discharge height Hmax: 8m
  • Liquid temperature range: 0 °C to +75 °C to +90 °C for 30 minutes
  • Insulation class: B
  • Operation: automatic
  • Certification: VDE - GS
  • Design according to: EN 12050 - 3
  • Degree of protection: IP44


2 items total
17149 image GENIX VT foto

GENIX VT 010 V230/50 sludge box - action

17149 image GENIX VT foto

GENIX VT 030 V230/50 sludge box - action

Vytvořil Shoptet | Design Shoptetak.cz.