DAB.NOVA - submersible sludge pump
The DAB.NOVA submersible sludge pumps are designed for efficient pumping of waste water without fibres in residential and light industrial applications. These units are suitable for installation in sumps, septic tanks, and similar environments where the pumped liquid contains suspended solids up to 25 mm in size. The range includes models with varying throughput capacities from 1 to 16 m³/h and discharge heads up to 10.2 m. The pumps operate with a watertight asynchronous motor cooled by the pumped liquid and are protected by an IP68 rating and insulation class F.
They are compatible with systems requiring single-phase or three-phase power inputs and are built to meet EN 60335-2-41 standards for domestic use. The operating temperature range of the liquid is between 0°C and +35°C. All models are supplied with a 5 m cable and a standard electrical plug for single-phase versions (SCHUKO CEE 7 - VII - UNEL 47166-68).
How to choose
- Match the pump’s throughput (5 mm for NOVA 180/200, 10 mm for NOVA 300/600) to the system’s flow requirements.
- Verify the suction depth compatibility (e.g., NOVA 180 M-A requires a minimum 77 mm depth).
- Ensure the pump is suitable for the liquid type and particle size (max 25 mm for most models).
- Confirm the power supply type (single-phase or three-phase) and motor protection requirements.
Frequently asked questions
What is the maximum immersion depth for DAB.NOVA models?
The maximum immersion depth is 7 m for all models in the DAB.NOVA range.
What is the standard electrical connection for single-phase versions?
A SCHUKO CEE 7 - VII - UNEL 47166-68 plug is supplied as standard for single-phase models.
What is the minimum suction depth for the NOVA 600 NA model?
The NOVA 600 NA requires a minimum suction depth of 38 mm.
