Daytime running lights STU SJ-287E

Product detailed description

Daytime running lights STU SJ-287E
Top quality daytime running lights ! The set of lights is completed with a module that ensures automatic switching on when the ignition is switched on and off when the vehicle's dipped-beam headlights are switched on. Approval according to ECE/UN No 48 under number E11 - 00 0006.

Technical data:

Consumption: 2x 4.8 W
Supply voltage 12 or 24 V
Built-in special LED modules with electronic current control
Service life for the life of the vehicle
Automatic light on and off
Robust waterproof design
Very spectacular white light with 6000K temperature (like xenon)
Dimensions (W x H x D): 120 x 36 x 48mm

Use of daytime running lights

In connection with the new legislative conditions regulating the operation of motor vehicles and mandating all-day lighting, replacement lighting for vehicles designed exclusively for daytime lighting in low visibility is very topical. The design and positioning of daytime running lights is governed by ECE/OSN Type Approval Regulation No 48, which is prescribed by Decree No 341/2002 Coll., and their use is governed by Act No 361/2000 Coll. on Road Traffic, as amended by Act No 411/2005 Coll. Daytime running lights are characterised by a strongly diffused light flux which does not form a cone as in the case of conventional headlamps. The diffuse nature of the light does not dazzle oncoming drivers or illuminate the roadway, but sufficiently ensures the essential condition for safe traffic 'to be seen'.

The main benefit of these auxiliary lights is energy saving, as they do not illuminate the vehicle's marker, dipped-beam or tail lights. Savings will also be made by extending the life of the bulbs or lamps, which will be felt especially by drivers of vehicles with xenon headlamps, whose lamps have a longer life than conventional bulbs, but are significantly more expensive to replace. The fitting of daytime running lights is not a conversion of the vehicle or a change in the technical data and therefore their fitting to the vehicle is not subject to any additional approval or registration.

Basic rules for retrofitting daytime running lights: - two lights (one pair) per vehicle

They shall be placed horizontally between 250 mm and 1500 mm high on the front of the vehicle
The distance of the lamps from the side contour is max. 400 mm and the distance between the lamps is min. 600 mm (for vehicles with a width of less than 1300 mm, a 400 mm distance between the lamps is permitted)
The lights come on automatically when the ignition is switched on (starting the engine) and go out when the ignition is switched off
The daytime running lights must go off automatically when the position lights are switched on