DEBBEX SF POLYESTER 165ml styrene-free chemical anchor

Product detailed description

Professional two-component chemical system for fast and strong anchoring. Ideal if you need to attach heavy elements indoors or outdoors, with the assurance of fast and quality work.

Where does it fit?
for interior and exterior
anchoring in concrete, masonry, brick, stone, etc.
fixing of facade elements, technological, sanitary or sports equipment, TV brackets, shelves, railing footings, grilles, posts, fences, cable trays, pipes, handrails, bars, awnings or gates, etc.

What to look out for?
the hole must be thoroughly cleaned before application
proper mixing of both components (grey colour)
use a mechanical or electric application gun for extrusion

How to anchor?
first drill a hole of the necessary dimensions
clean the bore properly with a brush and pump
using the application gun, push the first approx. 10 cm out of the hole until the anchor is grey in colour
then we apply the material directly into the hole
insert threaded rod or other elements by rotating movement

Where does it excel?
high strength
can also be applied to flooded boreholes
solidifies quickly
reduced odour

Technical parameters:

Volume: 165ml
Packaging type: cartridge
Colour: grey

Hazard identification
Component A
Signal Word: WARNING
H317 May cause an allergic skin reaction.
P101 If medical attention is needed, keep the product packaging or label handy.
P102 Keep out of reach of children.
P261 Avoid inhalation of vapours.
P280 Wear protective gloves.
P302+P352 IN CONTACT WITH SKIN: Wash with plenty of soap and water.
P501 Dispose of contents/packaging at hazardous waste collection point.

Component B
Signal Word: WARNING
H317 May cause an allergic skin reaction.
H319 Causes severe eye irritation.
P101 If medical attention is needed, keep the product packaging or label handy.
P102 Keep out of reach of children.
P280 Wear protective gloves and goggles/face shield.
P302+P352 IN CONTACT WITH SKIN: Wash with plenty of soap and water.
P305+P351+P338 AFTER COVERING EYES: Rinse them gently with water for a few minutes.
Remove contact lenses if they are in and if they can be removed easily. Continue rinsing.
P501 Remove contents/packaging at hazardous waste collection point.v