Electric water heater Floryda, 10L, bottom connection
Code: OW.FL.D10Product detailed description
The Floryda 10L is a small-volume electric water heater sized for a single point of use - a kitchen sink or a small washroom basin - where the supply pipe enters from below. It heats a full 10-litre tank to a temperature you set yourself, from 25C up to 75C, using a simple control knob.
The tank is cold-rolled steel with an enamelled interior at least 0.35mm thick, wrapped in 20mm of polyurethane insulation to reduce standby heat loss, and protected by a magnesium anode (15x135mm) against internal corrosion - replace it periodically to keep the tank protected. A power and a heating indicator light show status at a glance, and a 0.6MPa safety valve is fitted for protection against overpressure.
- Nominal capacity: 10L
- Connection: bottom (lower), vertical installation
- Rated power: 2000W
- Supply: 230V, 50Hz
- Thermostat range: 25-75C, knob control
- Thermal cut-off: 93C +/- 3C
- Maximum working pressure: 6 bar
- Energy class: A
- Dimensions: 35 x 36 x 26cm
- Net weight: 6.7kg
- Protection class: IPX4
- Tank material: cold-rolled steel, enamelled interior
- Heating element: stainless steel SS840
- Insulation: 20mm polyurethane
- Housing colour: white
- Power cord: 150cm, European plug
- Magnesium anode: 15 x 135mm
- Includes: assembly kit
Additional parameters
| Category: | Products | Water heaters | Electric water heaters |
|---|---|
| Warranty: | 2 roky |
| Weight: | 6.7 kg |
| EAN: | 5903887100854 |
| Model: | Floryda 10L, spodné pripojenie |
| Menovitý objem: | 10 l |
| Typ pripojenia: | Spodné, zvislá montáž |
| Napätie/frekvencia: | 230 V, 50 Hz |
| Menovitý výkon: | 2000 W |
| Rozsah termostatu: | 25-75 °C (otočný regulátor) |
| Tepelná poistka: | 93 °C ± 3 °C |
| Max. pracovný tlak: | 6 barov |
| Poistný ventil: | 0,6 MPa |
| Energetická trieda: | A |
| Rozmery: | 35 x 36 x 26 cm |
| Hmotnosť: | 6,7 kg |
| Krytie: | IPX4 |
| Materiál nádrže: | Za studena valcovaná oceľ, smaltované vnútro (min. 0,35 mm) |
| Vyhrievacie teleso: | Nerezová oceľ SS840 |
| Izolácia: | Polyuretán, 20 mm |
| Horčíková anóda: | 15 x 135 mm |
| Napájací kábel: | 150 cm, európska zástrčka |
Discussion
Be the first who will post an article to this item!
