Electronic fence D-FENCE 101 for dog

Product detailed description

Electronic fence D-FENCE 101 for dog
With the D-FENCE 101 invisible fence kit you can create an installation up to 1200 m long. The package contains 100 m of 0.75 mm² wire, with the option of purchasing an antenna wire.

The electronic invisible fence D-FENCE is a modern, highly efficient system that allows you to quickly and easily define the boundaries of the area in which the dog can move freely. This system offers the ideal solution in cases where your dog does not respect the existing fence and constantly runs away from your property, or if you need to demarcate areas inside your property and do not want your dog to have access to them, such as a children's sandpit, garden pool, ornamental beds, etc. The whole device can also be installed very easily in places where a conventional fence cannot be used.

Thanks to the electronic invisible fence, your dog will quickly learn to respect the boundaries of the defined space and will only move freely in places where he is not in danger.

The D-FENCE electronic invisible fence consists of a transmitting generator, a receiver and an antenna, the latter being a simple insulated wire. The transmitting generator generates a signal to the antenna wire, which you use to demarcate the selected area with an alert and correction zone. The receiver attached to the dog's collar senses the signal propagating from the installed antenna wire, if the dog crosses the boundary of the first (warning) zone, the receiver starts to emit an intermittent sound signal. If the dog does not respond to the audible warning and crosses the boundary of the second (correction) band, the receiver shall simultaneously emit an audible signal and a correction pulse. The intensity of the stimulation pulse, as well as the width of the correction and warning zones, can be easily adjusted. There is no limit to the number of dogs with the receiver attached to the collar. The collar is compact and waterproof and due to its light weight and ergonomic design it can be used for all dog breeds.

The electronic systems of the generator and the collar use modern technology based on 1-chip microprocessors. The device is suitable for any type of terrain, it can be installed very easily using common tools. For the invisible fence system to work, the wire must be connected to the transmitter and form an unbroken loop of wire (avoid damaging it). From the transmitter, unwind the wire around the property. The wire can be placed on the ground, shallowly buried (max. 10 cm deep) or attached to an existing fence or wall (in this case up to a maximum height of 30 cm above the ground). The standard package contains 100 m of aerial wire. If you need more than 100 m, you can buy an additional pack from us and then connect the wire using notch connectors (2 notch connectors are included in the basic pack). If you want the dog to be able to walk freely through a certain spot on your property that you need to run the wire through, wind the outgoing wire around the incoming wire, twisting the wires around causes interference to the emitted waves and the dog can move freely through that spot. The voltage in the antenna does not exceed 12 volts, so there is no danger even if the wire breaks. For better orientation it is possible to mark the defined area with targets.

Advantages of the D-FENCE invisible fence:

Very easy and quick installation (fence can be operational within 1 hour)
Inexpensive and very variable variant of fencing - if necessary, you can change the fencing in a moment according to the current requirements (pool, flowerbeds, rock garden, front door to the house, etc.)
The fence is "invisible", i.e. it does not interfere with the view of the surroundings, nor does it aesthetically disturb the garden. It can complement the existing fence, which the dog nevertheless overcomes (jumps, burrows, chews through...)
You can keep any number of dogs in the designated area

Transmitting generator:

1. bandwidth (warning): infinitely adjustable from 0.4 to 5 m
2. bandwidth (correction): infinitely adjustable from 0.3 to 1.5 m
Wire: low-impedance insulated copper 0,75 to 2,5 mm2, length max. 1200 m
Power supply: adapter 230 V / 50 Hz, 15 V / 100 mA
Area enclosed: 9 ha
Dimensions 152 x 119 x 42 (L x W x H)

Collar:

Dimensions: 34 x 43 x 64 mm
Weight: 60 g (without battery and electrodes)
Power supply: lithium battery CR2 3V
Battery life: 6 months standby
Adjustable neck circumference: 18 to 70 cm
Waterproof, reliable in any mode

The intensity of the stimulation pulse can be adjusted on the collar in eight levels. the ISIT function allows you to detect the presence and intensity of interfering signals in the places where you plan to install the antenna wire and thus avoid possible problems with the correct function of the D-FENCE device in advance.

Contents of delivery:

100 m of antenna wire with a cross section of 0.75 mm²
Generator
Power adapter
Magnet with lanyard
Notch connectors 2 pcs
Receiver with woven strap (75 cm)
Contact points 12 and 17 mm
Lithium battery CR2 3V
Test glowing glove
Instructions and DVD