ERMENRICH Seek TV50 thermal imager

Product detailed description

The Ermenrich Seek TV50 is suitable for a wide range of applications. When inspecting electrical equipment with a thermal imaging camera, hidden faults such as overheated contacts can be detected. When inspecting industrial and residential buildings, the Ermenrich Seek TV50 thermal imaging camera helps to find thermal leaks in facades and foundations. In construction work, it can be used to check the installation of underfloor heating, radiators and water heaters. The thermal imaging camera can also be useful in car servicing and repairs and in pest control (when looking for pests in a building). The temperature measurement range of the Ermenrich Seek TV50 thermal imaging camera is from -20 to +400 °C.

The thermal imager is equipped with a 32x32 pixel thermal imager (1024 pixels in total) and a 2 Mpix visible light camera. There are 4 modes: infrared mode, infrared edge detection mode, dual light vision mode and visible light mode. You can also choose from 7 color palettes. The image is displayed on the built-in color screen. Control and adjustment is done with four buttons below the screen and one button on the handle. There is a snapshot function - photos are stored on a memory card.

The device is held in the hand, there is no tripod mount. Power is provided by a rechargeable battery.

32x32 pix thermal imaging sensor and 2 Mpix camera, adjustable emissivity
7 color palettes, 4 modes, visible and infrared image fusion
High measurement accuracy from -20 to +400 °C
Image sensor function, data is stored on the memory card
Shockproof body, rechargeable battery power supply

Technical parameters:

Thermal imaging device type: manual
Microbolometer matrix resolution, px: 32x32
Spectral range, μm: 8-14
Speed: ≤9
Temperature measurement range, °C: -20 - 400
Temperature error, %: accuracy: 0...+400 °C: ±1.8 °C; -20... -0.9 °C: ±3 °C; resolution: 0.1 °C
Temperature sensitivity (NETD), mK: 150
Color palettes: hot black, hot white, hot red, iron red, cold color, iridescent, lava
Field of view (horizontal)x(vertical), °: 33 (horizontal), 18 mrad (instantaneous)
Fusion of optical and thermal images: +
Display: LCD, 2.4" TFT
Display resolution, px: 320x240
Operating mode: IR mode, IR edge detection mode, dual vision mode, visible light mode
Power: 2600 mAh, 3.7V, charging via microUSB cable (included)
Maximum load (impact), g: drop from a height of up to 1 meter
Camera temperature range, °C: -10...+45
Built-in recorder
Memory: 16 GB memory card (included)
Image format: *.bmp
Interface connectors: microUSB
Case/case/bag in set: case
automatic switch-off function
low battery indicator
camera resolution: 2 Mpix
adjustable emissivity from 0.1 to 0.99
response time: 150 ms

Contents of the set:

Thermal imaging camera
16 GB memory card
MicroUSB cable
Case
User manual and warranty card