Product detailed description
This float switch is commonly used in domestic and commercial pumping systems where automatic water level control is required. Installers typically integrate it into septic tanks, sumps, or reservoirs where submersible pumps are used to manage liquid levels. The device ensures the pump operates only when necessary, reducing energy consumption and wear. It is particularly suited for installations where water level fluctuations are expected and require reliable, maintenance-free operation.
By adjusting the position of the weight along the 10m cable, the activation level can be fine-tuned to match the specific requirements of the system. The waterproof design allows for installation in submerged environments without risk of damage. The switch is typically mounted in a vertical orientation, with the float responding to changes in water level to trigger the pump’s operation.
Technical parameters
| EAN | 6814165155 |
|---|
| Weight | 1.5 kg |
|---|
| Code | PR_1558 |
|---|
| Brand | IBO |
|---|
The 10m cable length allows for flexible positioning in tanks or sumps of varying depths. The H07 RNF cable type ensures durability and resistance to mechanical stress and environmental factors. The adjustable weight enables precise control over the activation level, making it suitable for different tank geometries and operational needs.Installation and connection
To install the float switch, the 10m cable must be routed from the pump control system to the desired location in the tank or sump. The weight should be positioned at the required activation level, ensuring the float moves freely without obstruction. The cable should be secured to prevent tangling or damage during operation. A common mistake is not allowing sufficient clearance for the float to move vertically, which can cause false triggering or failure to activate. Always verify that the cable is not kinked and that the float is not in contact with tank walls or obstructions.Compatibility and accessories
This float switch is compatible with submersible sewage and pressure pumps that require automatic level control. It is intended for use with control systems that accept standard float switch inputs. No additional accessories are required for basic operation. However, for larger or more complex installations, additional float switches or control panels may be needed to manage multiple zones or redundant systems.Technical background for designers
The float switch operates on a simple mechanical principle: as the water level rises, the float lifts the switch mechanism, completing the circuit and activating the pump. When the water level drops, the float lowers, breaking the circuit and stopping the pump. The switch is constructed from durable, waterproof materials to withstand prolonged exposure to water. The H07 RNF cable is resistant to abrasion and environmental factors, ensuring long-term reliability. The switch’s performance is influenced by the positioning of the weight and the smoothness of the float’s movement. Regular inspection of the float and cable is recommended to ensure continued operation.Service and operation
Periodic inspection of the float and cable is recommended to ensure there is no obstruction or wear. Check that the float moves freely and that the cable is not damaged or kinked. If the pump fails to activate or deactivate at the expected water level, the weight position should be adjusted. No specific service intervals are provided, but routine checks are advised to maintain system efficiency and prevent unexpected failures.Frequently asked questions
Can the float switch be used with submersible pressure pumps?
Yes, the switch is suitable for use with submersible pressure pumps where automatic level control is required.
Is the cable length adjustable?
No, the cable is fixed at 10m. The weight position can be adjusted along the cable to set the activation level.
Can the float switch be installed in horizontal orientation?
No, the switch must be installed vertically to allow the float to move freely with changes in water level.
What happens if the cable becomes kinked or damaged?
If the cable is kinked or damaged, the float may not move freely, which can lead to incorrect pump activation or failure to activate. The cable should be inspected regularly for signs of wear or damage.
