Gas detector AVANSA 100M + solenoid valve G3/4", DN 20

Product detailed description

Gas detectors and solenoid valves are essential components in heating and plumbing systems where gas is used as a fuel source. The AVANSA 100M gas detector with solenoid valve is designed for installation in environments where gas leaks could pose a risk to safety. It is commonly used in residential and commercial buildings, particularly in boiler rooms, utility areas, and industrial facilities where gas lines are present. The system detects gas accumulation at 10% of the lower explosive limit and triggers an alarm while activating the solenoid valve to shut off the gas supply. The device operates on AC 220V and is compatible with 12V DC solenoid valves, making it suitable for integration into existing gas safety systems.

Correct installation and configuration are critical to ensure the system functions as intended. The detector must be placed in a location where gas accumulation is likely to occur, and the solenoid valve must be connected to the gas supply line. The system is designed for use with natural gas (methane) and liquefied petroleum gas (LPG), and it includes a manual override for opening and closing the valve in emergency situations. The device is built to operate in a wide range of temperatures and humidity levels, making it suitable for both indoor and semi-outdoor environments.

Technical parameters

EAN	5949040800087
Package dimensions (mm)	70/230/140
Power supply	AC 220V 50Hz
Material	NBR/EKM rubber
Operating temperature	-15 °C... - 50 °C
Sensitivity	10% L.E.L. (lower explosive limit)
Response time	< 30 s
Closing time	< 1 s
Alarm sound level	> 90 dB at 1m distance from the detector
Weight	250 g
Maximum pressure	500 mBar (max. 1 bar pressure test for 20 minutes)
Connection to solenoid valve	12V
Opening	manual
Connections	G3/4" DN20
Energy consumption	in normal operating mode < 1.5 W - alarm 3 W
Solenoid body material	brass alloy, nickel
Sealing material	NBR/EKM rubber
Closing current	< 1.5 A (pulse)
Closing voltage	9 V DC - 12 V or manual
Humidity	< 97% RH (relative humidity)
Code	AVANSA PLYNOVY DETEKTOR -100MM-S VENTILO
Brand	AVANSA

The technical parameters of the AVANSA 100M gas detector and solenoid valve are essential for proper system sizing and compatibility. The detector has a response time of less than 30 seconds and a closing time of less than 1 second, ensuring rapid reaction to gas leaks. The solenoid valve can be operated with 9V to 12V DC or manually, and it supports a maximum pressure of 500 mBar. The detector is powered by AC 220V and consumes less than 1.5 W in normal operation, with an alarm power draw of 3 W. These parameters help determine the suitability of the device for specific applications and system configurations.

Installation and connection

Installation of the AVANSA 100M gas detector and solenoid valve requires careful planning to ensure the system functions correctly. The detector should be mounted in a location where gas accumulation is likely, such as near gas appliances or in enclosed spaces. The solenoid valve must be connected to the gas supply line using the specified G3/4