IVAR.IVC20 - 90° FF press bends

This category includes 90° FF press curves from IVAR.IVC20, designed for use in heating systems, permanently watered sprinkler systems, compressed dry air, inert gas, and industrial applications. These curves are manufactured from carbon galvanized steel and feature EPDM O-rings for sealing. The operating temperature range is from -20 °C to +85 °C, with a maximum of +120 °C during arcing. The fittings are suitable for PN 16 pressure ratings and are intended for use with press tools and pressing indicators up to 54 mm.

Available in a range of sizes from 15 x 15 mm up to 108 x 108 mm, these press curves are ideal for precise directional changes in pipe systems. They are designed to ensure leak-free operation when properly pressed and are free from substances that may interfere with surface coatings.

How to choose

• Select the correct size based on the nominal pipe dimensions (e.g., 28 x 28 mm or 76.1 x 76.1 mm) to match the system layout.
• Ensure compatibility with press tools and pressing indicators, particularly for sizes up to 54 mm.
• Verify that the EPDM O-ring is suitable for the intended fluid and operating conditions.
• Confirm the operating temperature range (-20 °C to +85 °C, max +120 °C) aligns with the system requirements.
• Use only with carbon galvanized steel pipes to maintain material compatibility and system integrity.

Frequently asked questions

What is the maximum operating temperature for these press curves?
The maximum operating temperature is +120 °C during arcing, with a normal range of -20 °C to +85 °C.

Can these curves be used with inert gases?
Yes, they are suitable for use with inert gases as well as compressed dry air and water-based systems.

Are these fittings compatible with all press tools?
They are designed for use with standard press tools and pressing indicators up to 54 mm. Always confirm tool compatibility before installation.