Hybrid voltage converter CARSPA MKS-2.2K, DC/AC 12V/1800W, MPPT regulated
Code: TI_04230715Product detailed description
Product description: hybrid voltage converter CARSPA MKS-2.2K, DC/AC 12V/1800W, regul.MPPT
The device is a combination of a pure sine wave inverter, UPS and MPPT controller for solar panels. It is thus a backup power supply with backup from the utility grid or generator, battery charger and MPPT controller for solar panels, while the backup priority can be set in reverse, i.e. priority of the utility grid and backup from batteries or PV panels.
Product parameters:
- Pure sine wave, suitable for all appliances
- MPPT solar controller for maximum yield
- single-phase island output without overflow (cannot be connected in parallel to DS)
- clear and adjustable LCD display
- selectable operating modes and power priority
- adjustable operating parameters as required
- integrated circuit breaker against short circuit/overload
- protection against overheating, overcharging and over-discharging of the battery
- possibility of using AGM and GEL batteries or LiFePO4 batteries (only for experienced users)
- if solar power is not available, the battery can be automatically recharged from the mains
- audible warning of faulty status and malfunction
- cold start and power saving function
- powerful active cooling
Specifications:
- Mains input voltage: 90-280 V AC
- frequency: 50/60 Hz (automatic detection)
- output: 1 phase, 230 V AC +- 5 %
- inverter power: 1800 W / 2200 VA
- Peak power: 3600 W/4000 VA in 5 seconds
- Switching delay 10-20 ms.
- Output waveform: pure sinusoid
- battery voltage: 12 V
- maintenance voltage: 13.5 V
- Battery overvoltage: 16 V
- Battery type: AGM, GEL, LiFePO4 (must be set correctly!)
- max. charging current from mains: 60 A
- max. current of MPPT controller: 80 A
- max. panel power: 2000 W
- max. solar panel voltage (Voc): 450 V DC
- Operating voltage range of the MPPT controller: 55 - 430 V
- Inverter power priority: solar/UPS/grid-powered batteries only
- Charging priority: solar/grid/solar + grid/solar only
- self-consumption: 2 W
- efficiency: 98 %
- dimensions: 405 x 286 x 96 mm
- operating temperature: 0 to 55 °C
- weight: 5 kg
- degree of protection: IP20
This product requires professional installation.
Additional parameters
| Category: | Hybrid inverters |
|---|---|
| EAN: | 8596425203307 |
| EAN: | 8596425203307 |
Discussion
Be the first who will post an article to this item!
