Hybrid voltage converter CARSPA MKS3200, DC/AC 24V/3000W, regul. MPPT

Product detailed description

Product description: hybrid voltage converter CARSPA MKS3200, DC/AC 24V/3000W, regul. MPPT
The device is a combination of a pure sine wave inverter, UPS and MPPT controller for solar panels. It is thus a backup power supply with utility grid or generator backup, battery charger and MPPT controller for solar panels, while the backup priority can also be set in reverse, i.e. with utility grid priority and battery or PV panel backup.


Product parameters:

- Pure sine wave, suitable for all appliances
- MPPT solar controller for maximum yield
- single-phase island output without overflow (cannot be connected in parallel to DS)
- clear and adjustable LCD display
- selectable operating modes and power priority
- adjustable operating parameters as required
- integrated circuit breaker against short circuit/overload
- protection against overheating, overcharging and over-discharging of the battery
- possibility of using AGM and GEL batteries or LiFePO4 batteries (only for experienced users)
- if solar power is not available, the battery can be automatically recharged from the mains
- audible warning of faulty status and malfunction
- cold start and power saving function
- powerful active cooling


Specifications:

- Input voltage: 90-280 V AC
- frequency: 50/60 Hz (automatic detection)
- output: 1 phase, 230 V AC +- 5 %
- inverter power: 3000 W / 3200 VA
- Peak power: 6000 W / 6200 VA in 5 seconds
- Switching delay 10-20 ms.
- Output waveform: pure sinusoid
- battery voltage: 24 V
- maintenance voltage: 27 V
- Battery overvoltage: 32 V
- Battery type: AGM, GEL, LiFePO4 (must be set correctly!)
- max. charging current from mains: 60 A
- max. current of MPPT controller: 80 A
- max. panel power: 3000 W
- max. solar panel voltage (Voc): 450 V DC
- Operating voltage range of the MPPT controller: 55 - 430 V
- Inverter power priority: solar/UPS/ mains-powered battery only
- Charging priority: solar/grid/solar + grid/solar only
- self-consumption: 2 W
- efficiency: 98 %
- dimensions: 405 x 286 x 96 mm
- operating temperature: 0 to 55 °C
- weight: 5,4 kg
- degree of protection: IP20

This product requires professional installation.