Jump Starter CARCLEVER 35813
Code: TI_06443408Product detailed description
The CARCLEVER starter power supply is used for emergency starting of cars, smaller vans, motorcycles, ATVs, lawn mowers, etc.
The starter power supply is connected to the vehicle via clips to the car battery contacts, activation occurs automatically and the readiness to start the vehicle is indicated by LED lights.
This device is a universal helper when the battery is low in almost all common devices.
The integrated 16,000 mAh battery has enough capacity to charge the device several times or start the car.
You can also use the device as a powerful PowerBank to charge any device via the USB slot.
lED information lights
powerful LED flashlight - illuminating / flashing / SOS
more than 1000 charging cycles
Technical parameters:
powerful built-in LiPO 16.000 mAh / 59.2 Wh battery
charging time: DC 5 V/hours
dimensions: 181 mm x 90 mm x 42 mm
weight: 576 g
operating temperature range: -20 °C to +60 °C
Outputs:
2x USB 5 V / 2.1 A, 5 V / 1 A
12 V / 1000 A (peak 2.000 A), battery clips for car battery for emergency starting
Inputs:
5 V / 2 A (USB-C power connector)
Contents of the package:
PowerBank
clips for connection to the car battery
uSB/USB-C cable
NOTICE:
The USB power cable (USB/connectors) may not be compatible with all devices If the supplied cable does not charge, use the original one.
If it is not possible to start the vehicle immediately, please wait 1 minute for it to cool down. Do not attempt to start the vehicle more than 3 times without a power source.
Before using the starter power, check that the vehicle cannot be switched on for any obvious reason other than a dead battery.
*Technical specifications and pictures are taken from the manufacturer and are for informational purposes only!
Additional parameters
| Category: | Jump starters |
|---|---|
| EAN: | 8595684123593 |
| EAN: | 8595684123593 |
Be the first who will post an article to this item!
Add a comment
