LCR meter and component tester FNIRSI LC1020E

Product detailed description

The FNIRSI LC1020E is a high precision portable digital LCR meter designed for detailed testing of electronic components such as inductors, capacitors and resistors.

Key Features:

High accuracy: the basic measurement accuracy is 0.3% with a display resolution of 4.5 digits.
Wide measuring range:
Inductance (L): 0 to 100 H.
Capacitance (C): 0 to 100 mF (including ESR measurement).
Resistance (R): 0 to 10 Mohm
Test Parameters:Supports 5 test frequencies (100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz) and 3 RMS signal levels (0.1 V, 0.3 V, 0.6 V).
Smart features.
Connectivity and Power: It features a 2.8" TFT color display, built-in 3000mAh battery with USB-C charging, and supports 4-wire Kelvin measurement to eliminate lead wire errors.

Specifications:

Display: colour TFT LCD display
Number of brightness levels: 10 brightness levels
Display size: 2.8"
Charging connector: USB-C
Basic accuracy: approximately 0.3 %
Inductance: 0-100H
Capacitance: 0-100mF
Resistance: 0-10 mohm
Measured parameters:AUTO/R/C/L/Z, secondary:X,D,Q,ohm,ESR
Test frequency: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz
Test levels: 0.1V/0.3V/0.6V
Internal bias voltage: 0.0V/0.5V
Measurement speeds: 0.5 V, 0.5 V, 0.5 V, 0.5 V. Fast (4/s), medium (2/s), slow (1/s)
Calibration: open circuit/short circuit
Sorting function: adjustable tolerance 0.1 - 99.9%, audible and visual indication
Data logging: success/failure counter
Output impedance: 100 ohms
Test ports: 3-pin socket and 5-pin socket (Kelvin 4-wire measurement)
Power: built-in 3.7 V 3000 mAh Li-Ion battery, USB-C charging
Auto Power Off: Yes
Dimensions: 185 × 85 × 35 mm
Weight: approx. 680 g

Contents of the package:

-measuring cables
-Kelvin clamps
-USB charging cable