Leveling Staple Set SX3106 Level System T-Hold 1mm 500pcs

Product detailed description

Set of high-quality LEVEL SYSTEM T-HOLD levelling staples for levelling tiles. These clips are used in combination with levelling wedges and tongs during the laying of tiles - you insert the clips into the joints according to the width of the joint, insert a wedge into the clip and use the special levelling tongs to level the tiles. Once the adhesive under the paving has set, use a rubber mallet to strike the clips, trim the joints and you're done. Nails, tongs and mallet are not included in this kit and must be purchased as needed.

Easy, fast and precise tiling
Eliminates height inequalities between tiles, called lippage
Suitable for tiles of all materials and shapes

Application:
1. During installation, insert clips into the joints between the tiles with a width according to the required joint width.
2. Insert the nails into all the clips.
3. Using the levelling pliers, tighten the first wedge into the clip before the tiles are level.
4. Screw the fixing screw onto the pliers according to the first nail to tighten the rest of the tiles or tiles with the same force.
5. Tighten the rest of the wedges.
6. After the adhesive has set (usually after 24 hours), remove the staples by striking the rubber mallet from the side in the direction of the joint.
Note: The wedges can be used repeatedly.
Note: The joint must be clean for proper removal of staples with a mallet.

Technical parameters:

Thickness: 1 mm
Width: 36 mm
Height: 40 mm
Material: plastic
For tile thickness: 4 - 15 mm
Contents of the package:

500 x Levelling clips 1 mm