MHPower POE-PAN16-GB Gigabit Shielded 16-Port POE Panel

Product detailed description

Panel in a 19" rack integrating 16 gigabit shielded passive POE injectors with a power range of 24 - 57V. Versatile solution for remote power supply of multiple active elements with integrated extractor over UTP cabling. Over-current protection up to 650mA (+/-15%) on each port, grounding led to casu. Three-stage LED indication of current values on three groups of ports. Port current 0-20mA (no signal) Port current 0-400mA (green led) Port current >400mA (red led) Adding this pass-through panel to the rack provides a power center that simply plugs in between an existing switch and a patchpanel that already leads to a powered device (IP camera, IP phone, wireless elements, etc.). Power input via two 2.1mm 60V jacks, from both inputs all 16 ports are always powered simultaneously in the mode according to the selected A/B input: A mode: Compatible with active elements with integrated POE injector using pins 1/2- and 3/6+ for power supply (such as IP, cameras, IP phones, CISCO active elements, etc.). Data over all 4 pairs. Mode B:. Compatible with active elements with integrated POE injector using pins 4/5+ and 7/8- for power supply (such as active elements MIKROTIK, UBIQUITI). Data over all 4 pairs. The power supply is not included, the choice and power parameters of the power supply must be optimized according to the respective power consumption of the powered elements and their configuration. Notice: You cannot combine the wiring of Ubiquiti 100Mbps products requiring a 24V power supply and products requiring a 48V power supply due to the different POE port behavior of Ubiquiti devices powered by 24V from, for example, the port behavior of MikroTik products. The panel integrates 16 passive Gigabit PoE injectors into a single 19" / 1U panel suitable for powering up to sixteen devices. Professional solution for remote power supply of multiple active devices with passive PoE support. Functions and Features: - 19" design - 16 ports with passive PoE support - LED indicator light to detect a working power adapter - Reversible current fluctuation protection (OCP protection 650mA) on each port - 2 power input connectors - standard 2.1/5.5mm jack - Input voltage 24-57V, maximum power 120W Technical specifications - Input: 24-57V/ 120W (2x 2.1 60V power jack) - Data: 1/2 & 3/6 & 4/5 & 7/8 - Power: A) 4/5+ & 7/8- (48V) B) 1/2- & 3/6+ (48V) - Weight: 1.4Kg - Dimensions: 482.6mm×44.3mm×52mm - Ethernet: TIA/EIA 568 Cat. 5 - Standards: passive PoE - Data rate: 10/100/1000Mbps - Connectors: 16x shielded GB RJ-45 - Operating Temperature: 0°C ~ 40°C - Storage Temperature: -40°C ~ +70°C - Operating Humidity: 10% ~ 80%RH - Storage Humidity: 5% ~ 90%RH - Certifications: CE