MikroTik RouterBOARD RBwAPR-2nD&R11e-LoRa8, wAP LoRa8 kit

Product detailed description

the wAP LR8 kit is a complete out-of-the-box solution for use as a gateway to the LoRaWAN network. The device includes a pre-installed R11e-LR8 module for forwarding UDP packets to any public or private LoRa server, 1 RJ45 Ethernet port, as well as a 2.4GHz wireless card for building an access point. All in the familiar wAP design for outdoor wall or mast mounting. The device has a built-in antenna with 2dBi gain for connection to the LoRa network. You can also connect an external antenna via an SMA connector for greater distance. the wAP LR8 kit supports frequencies 863 - 870 MHz and is thus designed for use in EU countries, Russia, India and others. Functional and non-invasive design, amazing durability and high added value - this is the wAP LR8, the long-awaited LoRa solution for LoRa enthusiasts at any level. LoRa is a solution for wireless data transmission where the main goal is the lowest power consumption at low acquisition cost and a small data rate is sufficient. MikroTik LoRa products are ready for (not only) The Things Network global network - a well-known open source infrastructure that provides LoRa network coverage and thousands of useful applications. With the help of The Things Network, you can get started with the Internet of Things in a single day. You can also easily upgrade to an enterprise solution Technical parameters Wireless features Wireless Frequency: 2.4 GHz, 863-870 MHz WiFi standards: 802.11n, 802.11b/g WiFi transmission speed - 2.4GHz [Mbps]: 300 2.4GHz transmit power [dBm]: 22 2.4GHz MIMO: 2 x 2 Antenna Type: Built-in Number of built-in antennas: 1 Antenna Gain [dBi]: 2 Physical characteristics Design: Ceiling-mounted, Outdoor Buttons: Reset Operating temperature [°C]: -40 to 60 Depth [mm]: 30 Width [mm]: 85 Height [mm]: 185 Hardware RAM [MB]: 64 CPU: QCA9531 CPU frequency [MHz]: 650 Number of CPU cores: 1 Connectors and interfaces RF connectors: (1) SMA female LAN speeds: (1) 10/100Mbps Power Power supply via PoE: 9 .. 30V DC PoE types: PoE-In (only) Max. power consumption [W]: 7 Power supply via connector/socket: 9 .. 30V DC Software Operating System: RouterOS - L4 Default IP address: 192.168.88.1 Default username and password: admin / -