Motion detector GETI GMD01

Product detailed description

Motion detector Geti GMD01
We offer a 3-year warranty on this product.

Think about the safety of your family, securing both private and business premises. The Geti GMD01 motion detector with built-in PIR sensor detects movement in the required areas. Immediately after detecting movement, the sensor sends a radio signal up to 150 m to the receiver, which then alerts you to a disturbance in the area with one of 58 possible melodies. Even a person with no technical knowledge can handle the installation. Simply plug the doorbell into the mains and place the battery-powered sensor in the location designated for detection. The motion detector with PIR sensor can be used in the interiors of apartments, houses, garages, shops, shopping centres and all-branch establishments. You can also use it as a passage detector. It is equipped with a Learning Code function allowing it to be paired with other receivers, SOS buttons or Geti GWD series doorbells.

Product parameters:

- 58 melodies and 5 volume levels
- optical LED signalling
- LEARNING CODE. The device allows pairing with other bells, sensors, SOS buttons or bells of the GETI GWD series
- up to 50 receivers or transmitters can be paired with each other
- the sensor has two detection modes: a) motion detection at intervals of 1-2 seconds
b) motion detection at intervals of 5-8 seconds
- the sensor can be powered by batteries or micro USB cable (not included and not used to charge the inserted batteries - easy installation)
- easy installation and operation
- low energy consumption

Technical parameters:

- range up to 150 m in open space
- detection area 3-4 m x 110°
- power supply: doorbell - AC 230V 50/60Hz
sensor - DC 3V (2x AAA battery) / 5V micro USB
- ringer power consumption: < 0.5W
- frequency: 433MHz ± 2MHz
- volume: 25 - 110 dB
- operating temperature: -15°C to 60°C
- dimensions: bell - 80 x 80 x 35mm
sensor - 85 x 55 x 35 mm
- packaging: blister / 20 pcs carton

Package contents: 2 screws, 2 dowels, screwdriver, instructions