Nano V3.0 R3, Atmega328P, exact Arduino clone

Product detailed description

This Arduino Nano clone is a minimized development board with an AVR ATmega328 microcontroller and the original USB converter. Functionally, it is identical to the Arduino UNO version, but is adapted to slip into a non-conductive contact field or device socket. The pins of the inputs and outputs are therefore routed to the bottom of the board. To minimize this, the external power connector is missing and the USB connector is reduced to the USB version. The board itself contains 14 digital I/Os and 8 analog inputs. The external power connector is replaced by a pair of pins for 5-20 V connections


Technical parameters:

- MCU: ATmega328
- USB/UART converter: FTDI FT232
- working voltage: 5V
- input voltage: 7-12V (max. 6-20V)
- I/O pins: 14 (6 usable as PWM output)
- analogue. 8 inputs
- dC current per pin: 40mA
- flash: 32 KB (ATmega328) 0.5 KB used for bootloader
- SRAM 2 KB (ATmega328)
- EEPROM 1 KB (ATmega328)
- Crystal: 16 MHz

A connection cable is also included.