Non-woven fabric black 50g/m² 3,2x5m

Product detailed description

Non-woven black fabric is commonly used in landscaping, construction, and garden projects to suppress weed growth and protect soil surfaces. It is installed beneath paving, in flower beds, or around irrigation systems to prevent unwanted vegetation while allowing water and air to pass through. The fabric is particularly useful in areas where long-term weed control is required without the use of chemical herbicides. It is compatible with various soil types and can be integrated into both residential and commercial projects, including garden paths, patios, and retaining walls. The material’s resistance to environmental factors ensures durability in outdoor conditions.

When selecting this product, installers should consider the surface area to be covered and the specific requirements of the project. The fabric is cut and overlapped as needed, with seams secured using appropriate methods such as staples or binding tape. It is important to ensure that the fabric is laid flat and free of wrinkles to maximise its effectiveness. The material should also be protected from direct mechanical damage during installation and subsequent construction phases.

Technical parameters

Installation and connection

Installation involves unrolling the fabric over the prepared surface and securing it with landscape staples or pins. The fabric should be overlapped by at least 10cm at the edges to prevent weeds from growing through the seams. It is important to ensure that the surface is clean and free of sharp objects that could puncture the material. Common installation mistakes include insufficient overlap, failure to secure the fabric properly, and installation over uneven ground, which can lead to wrinkles and reduced effectiveness. After installation, a layer of mulch, gravel, or paving can be added to hold the fabric in place and enhance its appearance.

Compatibility and accessories

This non-woven fabric is compatible with a range of landscaping and construction materials, including gravel, mulch, and paving stones. It is often used in conjunction with geotextile binding tape or landscape staples to secure seams and edges. For larger projects, additional rolls may be required to cover the entire area. Installers should also consider the use of protective layers or drainage systems if the project involves irrigation or water management.

Technical background for designers

The fabric is made from 100% polypropylene, a synthetic polymer known for its durability, resistance to UV radiation, and chemical inertness. These properties make it suitable for long-term outdoor use without significant degradation. The non-woven structure is formed by bonding fibres together through mechanical, thermal, or chemical processes, resulting in a material that is both strong and permeable. The black colour helps to absorb heat, which can aid in weed suppression by creating an inhospitable environment for plant growth. The material’s permeability allows water to pass through, preventing waterlogging and promoting healthy soil conditions.

Service and operation

Once installed, the fabric requires minimal maintenance. It should be inspected periodically for signs of damage, such as tears or punctures, which can allow weeds to grow through. Any damaged areas should be repaired or replaced as needed. The fabric should also be checked for displacement or wrinkling, which can reduce its effectiveness. No specific service intervals are required, but regular visual inspections are recommended to ensure continued performance.

Frequently asked questions

Can this fabric be used in areas with heavy foot traffic?
Yes, the fabric is suitable for areas with moderate to heavy foot traffic, provided it is properly secured and covered with a suitable surface material such as gravel or paving.

Is the fabric resistant to rot or decay?
Yes, the fabric is made of 100% polypropylene, which is resistant to rot, decay, and chemical degradation, making it suitable for long-term outdoor use.

Can the fabric be cut to size during installation?
Yes, the fabric can be cut to size using standard garden shears or a utility knife. It is recommended to overlap the cut edges by at least 10cm and secure them with staples or binding tape.

Does the fabric affect soil quality over time?
No, the fabric is inert and does not release harmful substances into the soil. It allows water and air to pass through, promoting healthy soil conditions while preventing weed growth.