Wholesale e-shop

PNI Safe House 400 pack of 2 gas detector and 3/4" solenoid valve kits, 85 dB siren, natural gas and LPG

Code: PNI-SH400-2
€37,32 / pcs €45,90 incl. VAT Measure price:
In stock at supplier

Detailed information

Product detailed description

The PNI Safe House 400 is a gas detector and solenoid valve kit that raises an alarm and shuts off the supply when gas leaks. The pack holds two such kits, so you can cover, for example, a kitchen and a boiler room or two flats.

The detector with a semiconductor sensor responds to natural gas (methane), LPG (propane-butane) and coal gas. The alarm triggers at only 10% of the lower explosive limit: a continuous siren of at least 85 dB sounds and a red LED flashes. According to the manufacturer the sensor lasts up to 5 years.

At the same time the detector sends a 9–12 V pulse to the valve with a 3/4" internal thread, which closes the gas supply in under 1 second. The valve body is made of aluminium alloy. The detector runs on 100–240 V AC and draws less than 3 W. It does not detect carbon monoxide (CO).

Installation and compatibility

Natural gas is lighter than air, so the detector is placed about 30 cm below the ceiling and 1.5 m from the gas source. LPG is heavier and sinks to the floor, so the detector goes about 30 cm above the floor, also 1.5 m from the source. Do not mount it where there is a lot of water vapour, as it could cause false alarms. After switching on, the sensor warms up for about 180 seconds.

The detector measures 72 x 115 x 35 mm and the valve 75 x 45 x 110 mm. The valve works at pressures up to 100 kPa and at −26 to +80 °C; the cable to the detector is 90 cm. Installing the valve on the gas pipe must be done by a qualified person authorised to work on gas installations.

Frequently asked questions

How many detectors and valves are in the pack?
Two detectors and two solenoid valves – that is, two complete kits.

How can the alarm be tested?
According to the manufacturer, press the button of a lighter and slowly bring it, unlit, to the detector inlet. The test works only after the sensor has warmed up.

Does the kit detect carbon monoxide?
No, it is not designed for carbon monoxide.

Technical specifications

BrandPNI
Manufacturer codePNI-SH400-2
EAN5949066548482
TypePack of 2 kits: 2 gas detectors + 2 solenoid valves 3/4"
Gases detectednatural gas (methane, CH4), LPG (propane, butane), coal gas
Alarmcontinuous siren ≥ 85 dB and flashing red LED
Alarm threshold10% LEL
Power supply100–240 V AC
Power consumptionless than 3 W
Output for solenoid valve9–12 V (pulse)
Sensor warm-up180 s
Detector dimensions72 x 115 x 35 mm
Solenoid valve dimensions75 x 45 x 110 mm
Valve connection3/4", internal thread
Closing modeby pulse or manually
Closing timeless than 1 s
Maximum pressure100 kPa
Valve materialaluminium alloy
Operating temperaturevalve −26 to +80 °C
Cable lengthscable to the valve 90 cm
Package contents2 gas detectors, 2 solenoid valves
Weight1.204 kg
Warranty24 months

Additional parameters

Category: Gas detectors and flood protection
Warranty: 2 years
Weight: 1.204 kg
EAN: 5949066548482
Brand: PNI
Manufacturer code: PNI-SH400-2
EAN: 5949066548482
Type: Pack of 2 kits: 2 gas detectors + 2 solenoid valves 3/4"
Gases detected: natural gas (methane, CH4), LPG (propane, butane), coal gas
Alarm: continuous siren ≥ 85 dB and flashing red LED
Alarm threshold: 10% LEL
Power supply: 100–240 V AC
Power consumption: less than 3 W
Output for solenoid valve: 9–12 V (pulse)
Sensor warm-up: 180 s
Detector dimensions: 72 x 115 x 35 mm
Solenoid valve dimensions: 75 x 45 x 110 mm
Valve connection: 3/4", internal thread
Closing mode: by pulse or manually
Closing time: less than 1 s
Maximum pressure: 100 kPa
Valve material: aluminium alloy
Operating temperature: valve −26 to +80 °C
Cable lengths: cable to the valve 90 cm
Package contents: 2 gas detectors, 2 solenoid valves
Weight: 1.204 kg
Warranty: 24 months

Discussion

Be the first who will post an article to this item!

Do not fill out this field
Vytvořil Shoptet | Design Shoptak.cz.