PNI Safe House Dual Gas 250 kit, 2 gas and CO detectors with 3/4" solenoid valves, 85 dB siren, white
Code: PNI-SH250-2Product detailed description
The PNI Safe House Dual Gas 250 is a kit for spaces where combustible gas or carbon monoxide may leak – a boiler room, a kitchen with a gas appliance or a garage. This pack contains two complete kits, that is two detectors and two solenoid valves with a 3/4 inch internal thread, plus power and connection cables.
Each detector has two semiconductor sensors: one for carbon monoxide (CO), the other for the remaining gases. It recognises natural gas (methane, propane, butane, ethane), gaseous hydrocarbons (propylene, butylene) and coal gas. The alarm threshold is 7% of the lower explosive limit. On alarm a siren above 85 dB sounds and the ALARM, FAULT, POWER and TEST LED indicators on the front light up.
When gas is detected, the detector sends a 9–12 V pulse to the solenoid valve, which closes the gas supply; the valve can also be closed by hand. The detector does not detect smoke, fire or gases outside the listed groups.
Installation and compatibility
The detector runs on 230 V AC and draws 3 W at most. It is for indoor use only at humidity up to 95%. After switching on, the sensor warms up for 180 seconds. The detector measures 72 x 33 x 123 mm (200 g) and the valve 65 x 45 x 105 mm (380 g). The cable from the detector to the valve is 90 cm and the mains cable 140 cm.
The valve has a 3/4" internal thread, works at a pressure of 100 kPa at most and at temperatures from −10 to +60 °C. Installing the valve on the gas line must be done by a qualified person authorised to work on gas installations. The kit does not replace the inspection of the gas and flue system.
Frequently asked questions
What is in the pack?
Two gas and CO detectors, two 3/4" solenoid valves and cables – double the single kit.
Does the detector detect smoke or fire?
No. It responds only to CO, combustible gases and the hydrocarbons listed by the manufacturer.
Is it suitable for a damp bathroom?
No, the detector is for indoor use at humidity up to 95%.
Technical specifications
| Brand | PNI |
| Manufacturer code | PNI-SH250-2 |
| EAN | 5949066532245 |
| Type | Pack of 2 kits: 2 gas and CO detectors + 2 solenoid valves 3/4" |
| Gases detected | carbon monoxide (CO), natural gas (methane, propane, butane, ethane), gaseous hydrocarbons (propylene, butylene), coal gas |
| Alarm | audible siren above 85 dB and LED indicators (ALARM, FAULT, POWER, TEST) |
| Alarm threshold | 7% LEL |
| Power supply | 230 V AC |
| Power consumption | 3 W max. |
| Output for solenoid valve | 9–12 V (pulse) |
| Intended use | indoor only, humidity ≤ 95% |
| Sensor warm-up | 180 s |
| Detector dimensions | 72 x 33 x 123 mm, 200 g |
| Solenoid valve dimensions | 65 x 45 x 105 mm, 380 g |
| Valve connection | 3/4", internal thread |
| Closing mode | by pulse or manually |
| Maximum pressure | 100 kPa |
| Operating temperature | valve −10 to +60 °C |
| Cable lengths | detector to valve 90 cm, mains cable 140 cm, valve to detector 30 cm |
| Package contents | 2 gas detectors, 2 solenoid valves, power and connection cables |
| Weight | 1.346 kg |
| Warranty | 24 months |
Additional parameters
| Category: | Gas detectors and flood protection |
|---|---|
| Warranty: | 2 years |
| Weight: | 1.346 kg |
| EAN: | 5949066532245 |
| Brand: | PNI |
| Manufacturer code: | PNI-SH250-2 |
| EAN: | 5949066532245 |
| Type: | Pack of 2 kits: 2 gas and CO detectors + 2 solenoid valves 3/4" |
| Gases detected: | carbon monoxide (CO), natural gas (methane, propane, butane, ethane), gaseous hydrocarbons (propylene, butylene), coal gas |
| Alarm: | audible siren above 85 dB and LED indicators (ALARM, FAULT, POWER, TEST) |
| Alarm threshold: | 7% LEL |
| Power supply: | 230 V AC |
| Power consumption: | 3 W max. |
| Output for solenoid valve: | 9–12 V (pulse) |
| Intended use: | indoor only, humidity ≤ 95% |
| Sensor warm-up: | 180 s |
| Detector dimensions: | 72 x 33 x 123 mm, 200 g |
| Solenoid valve dimensions: | 65 x 45 x 105 mm, 380 g |
| Valve connection: | 3/4", internal thread |
| Closing mode: | by pulse or manually |
| Maximum pressure: | 100 kPa |
| Operating temperature: | valve −10 to +60 °C |
| Cable lengths: | detector to valve 90 cm, mains cable 140 cm, valve to detector 30 cm |
| Package contents: | 2 gas detectors, 2 solenoid valves, power and connection cables |
| Weight: | 1.346 kg |
| Warranty: | 24 months |
Discussion
Be the first who will post an article to this item!