Pressing jaws MINI B / M / TH

The pressing jaws MINI B / M / TH are designed for use with the IVAR.MINI-PRESS ACC electrohydraulic press. They enable precise pressing of fittings in the IVAR.ALPEX, IVAR.C-STEEL, IVAR.INOX and IVAR.AC systems. Each jaw is tailored to a specific system and pipe size, ensuring correct pressing profiles and secure connections. These tools are essential for installers working with copper, steel or composite piping in heating, plumbing and sanitation applications.

The MINI B series is used for IVAR.ALPEX fittings, the MINI M series for IVAR.C-STEEL and IVAR.INOX, and the MINI TH series for IVAR.AC. All jaws are sized to match nominal diameters from 15mm to 35mm, depending on the system. They are made from hardened tool steel to resist wear and maintain dimensional accuracy over time.

How to choose

• Select the correct series (B, M or TH) based on the fitting system being used (ALPEX, C-STEEL/INOX or AC).
• Match the jaw size to the nominal diameter of the pipe or fitting (e.g. B16 for 16mm ALPEX, M15 for 15mm C-STEEL).
• Ensure compatibility with the IVAR.MINI-PRESS ACC press, as these jaws are not designed for other pressing units.

Frequently asked questions

What is the difference between MINI B and MINI M pressing jaws?
MINI B jaws are for IVAR.ALPEX fittings, while MINI M jaws are for IVAR.C-STEEL and IVAR.INOX systems. They differ in pressing profile and material compatibility.

Can I use a MINI TH jaw with a different pressing unit?
No, MINI TH jaws are designed specifically for use with the IVAR.MINI-PRESS ACC electrohydraulic press. Using them with other units may result in incorrect pressing or damage to the tool.