Pressure vessel 100l upright-slatted with manometer

Product detailed description

This upright-slatted pressure vessel is commonly used in domestic water supply systems, transfer stations and industrial pump installations. It serves as a buffer for pumped water, reducing the frequency of pump start-stop cycles and extending the system's operational life. The slatted design allows for efficient space utilisation in mechanical rooms and pump houses. The integrated manometer provides real-time pressure monitoring, which is essential for system diagnostics and maintenance.

Installers working with this model typically handle systems where stable water pressure is critical. The vessel is suitable for applications where the pump's maximum operating pressure does not exceed 8 bar. The rubber bladder inside ensures that water is stored separately from the compressed air, preventing waterlogging and reducing maintenance requirements. This makes it ideal for installations where long-term reliability and minimal intervention are priorities.

Technical parameters

EAN	5907222763551
Volume (l)	100
Dimensions H x W x D (cm)	76x46x49,5
Code	PR_38306
Brand	IBO

The 100-litre capacity is suitable for medium to large water supply systems, where frequent pump cycling is a concern. The dimensions (76 x 46 x 49.5 cm) allow for installation in standard mechanical rooms. The maximum operating pressure of 8 bar must be considered when selecting compatible pumps and pressure switches to ensure system compatibility and safety.Installation and connection The pressure vessel is installed vertically or horizontally depending on available space. It connects to the system via standard pipe fittings, typically with a 1/2 inch thread. The rubber bladder is pre-charged with air during manufacturing, eliminating the need for initial air charging. Installers should ensure that the vessel is mounted on a stable, level surface and that all connections are tightened to the manufacturer's specifications. A common mistake is neglecting to check the air pressure in the bladder after installation, which can affect system performance.Compatibility and accessories This pressure vessel is compatible with all pump types that operate within the 8 bar pressure limit. It is typically used with pressure switches and control systems designed for water supply applications. Additional components such as pressure switches, valves and piping may be required depending on the system configuration. No specific accessories are included with the vessel.Technical background for designers The vessel operates on a bladder principle, where the rubber bladder separates the water from the compressed air. This design prevents water from coming into direct contact with the vessel's metal walls, reducing corrosion and extending the system's life. The bladder is made from materials suitable for contact with potable water. The vessel's efficiency is influenced by the bladder's integrity, the system's pressure settings and the frequency of pump operation. Proper sizing ensures that the vessel can accommodate the system's expansion and contraction cycles without excessive pressure fluctuations.Service and operation The rubber bladder requires periodic inspection of the air pressure, ideally every six months. A drop in pressure may indicate a leak or wear in the bladder. The manometer provides a visual indication of the system's pressure, allowing for early detection of issues. No other routine maintenance is required under normal operating conditions. The vessel should be checked for physical damage and proper mounting during routine system inspections.Frequently asked questions

Can the pressure vessel be used with a variable speed pump?
Yes, provided the pump's maximum operating pressure does not exceed 8 bar. The vessel helps stabilise pressure fluctuations in such systems.

Is the rubber bladder replaceable?
Yes, the bladder can be replaced if damaged. However, this should be done by a qualified technician to ensure proper installation and system integrity.

Does the vessel require an air compressor for initial charging?
No, the bladder is pre-charged at the factory. No additional air charging is required before installation.

Can the vessel be installed in a horizontal position?
Yes, the upright-slatted design allows for both vertical and horizontal installation depending on space constraints.