Pumping station SANIBO Mini

Product detailed description

The IBO SANIBO Mini pumping station is typically installed in domestic and commercial buildings where gravity drainage is not possible. This compact unit is commonly found in basements, utility rooms, and areas requiring subfloor drainage. It connects to multiple fixtures such as hand basins, shower trays, and laundry appliances. The design allows simultaneous operation of several devices while maintaining efficient hydraulic performance.

When installing in confined spaces, the compact dimensions (15 x 35 x 16 cm) make it suitable for tight enclosures. The unit operates on standard single-phase power supply and requires proper sealing of unused inlet ports to prevent backflow and odour ingress. The absence of a macerator means it cannot handle food waste or fibrous debris, which must be considered during planning and design stages.

Technical parameters

Installation and connection

Installers should follow these steps for correct setup:

• Position the unit in a stable, level location with adequate ventilation.
• Connect inlet pipes using standard thread types for water-tight integrity.
• Ensure all unused inlets are sealed with the included caps to avoid leaks.
• Verify electrical connections are secured and insulated.
• Test operation by running water through all connected fixtures simultaneously.

Common installation errors include incorrect sealing of unused inlets, poor alignment of the pump body, and insufficient clearance for maintenance access. Always confirm that the pump casing is fully submerged in liquid to prevent dry-running damage.

Compatibility and accessories

This unit is compatible with standard bathroom and laundry fixtures. It supports simultaneous use of multiple devices like hand basins, bidets, and shower trays. However, due to the lack of maceration capability, it is not suitable for kitchen sinks or disposal units. Additional metal covers and seals are included in the standard package to ensure secure and hygienic operation.

Technical background for designers

The SANIBO Mini operates using a centrifugal pump mechanism, which generates pressure to lift and transport wastewater. The housing is constructed from durable materials to resist corrosion and wear. The absence of moving parts in contact with the pumped medium minimises clogging risks when handling clean wastewater.

For optimal integration, the pump should be placed near the lowest point of the drainage circuit to reduce horizontal pipe runs. System efficiency depends on correct sizing of inlet and outlet pipes, avoiding sharp bends, and maintaining a stable power supply. Long-term performance is affected by the quality of the pumped liquid — high solids content or temperatures exceeding 45°C will reduce operational lifespan.

Service and operation

No specific service intervals are provided, but regular visual inspections are recommended to check for signs of wear or leakage. Ensure the pump remains fully submerged and free from obstructions. If unusual noises or reduced flow occur, disconnect power and inspect for blockages or seal failures. In case of malfunction, refer to the technical documentation for troubleshooting guidance.

Frequently asked questions

Can the IBO SANIBO Mini be connected to multiple fixtures?
Yes, it supports simultaneous use of multiple devices such as basins, bidets, and shower trays.

Is the unit suitable for kitchen sink connections?
No, it lacks a macerator and is not recommended for kitchen use due to the risk of clogging from food particles.

What is the maximum vertical lift capability?
The pump can deliver wastewater up to a height of 6.5 m.

Does the unit include all necessary components for installation?
Yes, it includes the pump, seals for unused inlets, and metal covers for protection.