PWM solar controller EPever 20A 12/24V LS series

Product detailed description

High quality solar PWM controller 20A 12V/24V. Suitable only for panels with approx. 300Wp/12V battery and 600Wp/24V battery.
PWM solar controller. Its design is intended for small island solar systems with 12V solar panels (36 cells) for charging a 12V battery, or 24V solar panels (72 cells) for charging a 24V battery and a maximum charging current of up to 20A. The advantage is very simple and easy installation and reliable operation.

We recommend operating with these solar panels from our range:
- victron Energy 30Wp/12V solar panel
- victron Energy 60Wp/12V solar panel
- victron Energy 90Wp/12V solar panel
- victron Energy 115Wp/12V solar panel
- victron Energy 175Wp/12V solar panel

Setting the controller parameters is done using the MT50 external display.
Parameter setting and monitoring can also be done on your PC - you will only need an EPsolar USB communication cable and software.


Technical parameters:

- automatic detection 12V or 24V
- three phases of battery charging.
- surge protection.
- short-circuit protection.
- reverse polarity protection for solar panel and battery connections.
- disconnects the load output at low voltage.
- optional external temperature sensor
- programmable and traceable via external MT-50 display
- rS485 interface MODBUS communication protocol
- dimensions: 159.6x81.4x47.8mm
- weight: 300g
- operating temperature: -35 °C to +55 °C
- maximum size of connecting cables: 4mm2
- designed for indoor installations, wall mounting
- for recharging lead-acid batteries
- protection class: IP30