PWM speed controller for DC motors 6-60V up to 30A

Product detailed description

Pulse speed controller module (PWM) for DC commutator motors 6-60VDC/30A with additional control functions.

Technical parameters:

- input voltage: 6-60V DC
- output voltage: depending on load and power supply
- output current: max. 30A, permanently 20A
- speed control range: 0-100%
- pulse frequency: 21kHz
- panel dimensions: 96×61mm
- mounting hole: 92×56mm
- weight: 100g

A description of the wiring is shown on the PCB on the underside of the terminal block:

- dC power terminal: +POWER-
- motor connection terminal: +MOTOR-
- available features:

When you press the MENU button, the following functions will be available. The function number appears on the left side of the display under the SET label. The specific values for each function are set with the up/down arrows and are displayed on the right side of the display labeled PWM OUT. The RUN/STOP button is then used to start or stop the set process.

- 1- Setting the start-up time after switching on in the range of 0-10 seconds, step 1 second
- 2- Setting the timeout period after shutdown in the range of 0-10 seconds, step 1 second
- 3- Setting the lower speed limit in the range of 0-80%, step 0.4%
- 4- Setting the upper speed limit in the range of 0-100%, step 1%
- 5- Setting the speed change step, the available steps are 1-2-5-10-15-20 and 25%

The product is not a self-contained functional unit and requires professional assembly.

Packing: 1 pcs