Set for photovoltaic water heating GETI GWH01 2275W 5x PV Trina

Product detailed description

Kit for easy installation of water heating in boilers and other installations.

The kit consists of Trina Solar TSM-NEG9R.28 monocrystalline panels, Vertex S+ double glass type N ( 5x 04280455 ) 455 W each, GETI GWH01 4000 W controller ( 1x 04290246 ) and a complete 25 m long wiring harness ( 25x 04290190 + 25x 04290189 ) with MC4 connectors attached ( 2x 03360241 + 2x 03360240 ).

Note: The GETI GWH is only suitable for resistive loads with a bimetal thermostat (not suitable for electronically controlled thermostats!).

The system is simple, requiring only the connection of 5 photovoltaic panels with an operating voltage of about 34 V or the appropriate number of others to the GWH01 controller and energy loads ( boiler, heater, electric boiler, underfloor heating, etc.)

The GETI GWH01 inverter is equipped with an LED panel that informs the user about the current status of the inverter. :
- indication of water heating from photovoltaic panels
- 230 V AC mains water heating indication
- indication of comparison
- indication of fault condition

The maximum output of the controller is 4000 W, the controller has a priority input from PV panels and if this voltage drops below 120 V, the water heater will be fed from the 230 V AC network.

These are oversized goods that are not covered by free shipping. Delivery time from order creation may be extended by 3-4 working days.

Specifications:

SOLAR CONTROLLER GETI GWH01

- input voltage (VDC): 160 to 350 (VDC)
- Input voltage (VAC): 230 V AC
- Output voltage [VAC]: 230 V AC (VAC)
- maximum power: 4000 W
- MPPT function: YES
- Connection of photovoltaic panels: series or series-parallel
- Priority input: PV panels
- backup input: 230 V AC mains
- operating temperature: -25 °C ~ +55 °C
- efficiency: > 99%
- cooling: passive
- short-circuit protection at the input
- overheating protection
- PV panel input connection: connectors MC4
- Input connection 230 V AC: screw terminal
- Output connection 230 V AC: screw terminal
- Material: aluminium
- degree of protection: IP65
- Dimensions l x w x h [mm]: 250 x 155 x 80 mm
- weight: 3 kg

Trina Solar photovoltaic panel TSM-NEG9R.28, Vertex S+ Dual Glass N-Type

Technical parameters:

- Nominal power: 455 W
- Type: type N, Topcon, monocrystalline
- module efficiency: 22.5%
- maximum current (Imp): 10.09 A
- Maximum supply voltage (Vmp): 44.6 V
- voltage at no-load (Voc): 52.9 V
- short-circuit current (ISC): 10.74 A
- Maximum system voltage: 1500 VDC (IEC)
- Connector type compatible with MC4/MC4
- Front glass: 1.6 mm heat-reinforced high-transparency glass
- degree of protection: IP68.
- Number of articles: 144.
- Dimensions: 1762 x 1134 x 30 mm
- weight: 21 kg
- frame: anodised aluminium alloy
- frame colour: black

ATTENTION! The system is designed for resistive loads only.

The kit includes:
5 Trina Solar monocrystalline photovoltaic panels
Solar controller GETI GWH01
Cable set 25 m
MC4 connectors
Installation instructions