Smart temperature and humidity sensor IMMAX NEO 07570L ZigBee Tuya

Product detailed description

Temperature and humidity readings can also be monitored remotely to create smart home automation. Using the Immax NEO smart gateway (available separately), you can feed information from the sensor into the IMMAX NEO PRO app.
Once connected to your smart home network, you will be able to monitor the current temperature and humidity via the IMMAX NEO PRO mobile app anytime, anywhere. All you need is internet access. In the mobile app, you can also trace back the temperature trend in the past. In addition, you can create automation for your smart home with the current temperature and humidity information. In the app, you can program automations based on three values: temperature, humidity, battery status.
Another important requirement is that the sensor is within range of the smart gateway. ATTENTION - this is not a WiFi sensor, it requires an Immax NEO smart gateway (can be purchased separately), or another Tuya hub/bridge/gateway on a platform that communicates using the ZigBee 3.0 standard. The system is fully compatible with iOS, Android, Amazon Alexa, Apple Siri shortcuts, Google Assistant, TUYA, Lidl.

Technical parameters:

Protocol: ZigBee 3.0
Frequency: 2400MHz~2483.5MHz
Maximum RF output power: ZigBee: 10dBm - max 19dBm
Wireless range: 30 m direct visibility, 10 m in built-up area
Power source: 1x 3V CR2032 battery
Operating voltage: 2.4V-3.3V
Average operating current: 5 mA (Zigbee)
Standby current: < 3uA
Battery life: 6 - 8 months
Data detection: temperature and humidity are detected every 5 seconds
Data update: when temperature change is greater than 0.6 degrees or humidity change is greater than 6%; by default, data is sent to the app every 30 minutes
Operating temperature: -10 °C to +50 °C
Operating humidity: maximum 95% (non-condensing)
Degree of protection: IP20
Certificates:CE
Dimensions: 35x35x8mm
Weight: 8g

Package contents: sensor, user manual