Solar island set SOLARFAM 110Wp, 12V, battery 100Ah, inverter 230VAC 600W

Product detailed description

Basic solar island kit at a discounted price for locations without electricity. The kit is economically designed and engineered for lower energy consumption. Ideal for garden houses, gazebos, cottages, boats or even motorhomes where purchase price is a consideration.

Attention! The installation of the solar kit should only ever be carried out by a suitably qualified person!

The assembly operates with a system voltage of 12 V.

NOTE: The photo of the assembly is for illustration only. The components supplied may actually differ from the components shown in the picture. This does not affect the listed parameters or the function of the assembly.

The solar system includes the following components:

1x SOLARFAM solar panel 12V/110W shingle monocrystalline panel all black "Cat.No.: 04280321
1x SOLARFAM PWM solar controller 12-24V/30A "Cat.No.: 04280139"
1x SOLARFAM solar cable 2x10,0M-4mm2 red-black "Cat.No.: 04290056"
1x fuse disconnector for photovoltaic panel 12 A "Cat.No.: 04290197"
1x GETI GF-F02 16A fuse disconnector, cat.no. "04290198
1x 12V/230V 600W pure sine wave voltage converter with D.O. cat. no. 04230595
1x Gel battery 12V 100Ah GETI for solars cat.no.: 04250446

The kit contains a set of two cables with a length of 10 m. At the ends of the cables are pressed MC4 connectors for connection to the solar panel. Part of the cable will also be used to connect the solar controller and battery. The inverter is equipped with DC cables with clamps.

- Install a 12A fused disconnect switch on the positive cable between the panel and the controller to the PV panel.
- Install a 16A fused disconnect switch on the positive cable between the controller and the battery.

The assembly does not include mounting components. They must be ordered separately according to the intended method of placement.

Panel weight: 6.5 kg
Assembly weight: 35 kg

We reserve the right to change components according to availability without prior notice. Any change does not affect the functionality of the assembly.