Solar lamp TRIXLINE TR-05S PIR

Product detailed description

A stylish and economical solution for lighting your garden, terrace or balcony. The TR-05S LED solar light with motion sensor can be easily placed on a wall, for example, has 8 LED lights in front and 2 LED lights shining from the side. Thanks to the solar power supply, it is ideal for outdoor use without the need to be connected to the mains. In case of adverse lighting conditions, the light can also be charged via the included USB-C cable.

Specifications:

Power: 3 W
Luminous flux: 300 lm
Light temperature: 4000K
Number of LEDs: 8x white front, 2x white rear
Material: plastic
Colour: black
Dimensions (WxHxD): 105x130x80 mm
Sensor: PIR, 120°, distance up to 5 m, switching time 30 s
Solar panel: 5.5 V 100 mA
Rechargeable battery: 1x 3.7 V, 1200 mAh (included)
Charging: USB-C
USB charging time: 7-8 hours
Illumination time: up to 10 hours when fully charged
Lifetime: 30 000 hours
Operating temperature: -20°+40°
CRI: 80Ra
Function:ON / AUTO / OFF
Protection: IP54

Package contents: light TR-05S, USB-C cable, 2x cross-slotted screw 2.5 cm, 2x dowel, instructions

NOTES:
1. The solar light is designed to shine after dark. If it is not properly placed in a sunny enough location, the LED light may be very dim or may not shine at all after dark.
2. Batteries must be fully charged before first use. Place the power switch in the OFF position.
3. Cover the solar cell, place in direct sunlight for a minimum of 36-48 hours.
4. When the batteries are charged, place the switch in the ON position. The lamp will automatically turn on at dusk and charge during the day.
5. If the lamp stops shining after a long period of use, this will usually be due to the batteries being past their useful life.
6. Open the battery compartment and replace the batteries with new ones of the same type and capacity.