Time switch ELEKTROBOCK CS3-4M multifunctional without zero wire

Product detailed description

Time switch ELEKTROBOCK CS3-4M multifunctional without zero wire
The switch under the CS3-4M switch is in wiring WITHOUT ZERO DRIVER and has the possibility of setting EIGHT SHUTDOWN FUNCTIONS.

Features of CS3-4M
is a multifunctional time relay for controlling resistive (light bulbs) and inductive loads (fans) with the possibility of mounting under the switch and in wiring without a neutral conductor.

Eight CS3-4M functions
time delay with interrupt option
delayed shutdown (similar to CS3-1)
multi-time relay with interlocking
time relay without interlocking
impulse relay (control from multiple locations)
delayed switching
delayed switching on and off
flasher

A great advantage is the linear time setting (coarse with the switch, fine with the trimmer), the wiring WITHOUT ZERO DRIVER and the setting of the 8 following functions.
1. Time relay with interrupt option - load switching and timing occurs immediately after the button is pressed. By pressing the button again during timing, the load can be switched off.
2. Delayed tripping (similar to CS3-1) - the load is switched on at the moment the button is released, the load is switched off after timing out.
3. Multi-time relay with interlocking - the number of presses (max.5x) multiplies the set time. At the sixth press, the time is reset to zero. If the button is pressed for approx. 3s during timing, the load is switched off.
4. Time relay without interrupt - the load and timing are switched immediately after the button is pressed. The load is switched off after timing.
5. Impulse relay (control from multiple locations) - pressing the button switches the load on and pressing the button again switches the load off. The length of the button press does not matter.
6. Delayed switching - after pressing the button, the set time (delay) is delayed, then the load is switched on, which lasts until the button is released.
7. Delayed switching on and off - after pressing the button, the set time (delay) elapses, followed by switching on the load. After the switch is released, the load is switched off with the same delay.
8. Flasher - when the button is permanently switched on, the load is switched on at set time intervals of 1:1.

Technical parameters
Power supply 230.0 V / 50 Hz
Mounting type under the switch
Installation without neutral wire Yes
Resistive load 15 W to 200 W
Inductive load 15 VA to 100 VA
Power input 1 W
Switching element triac
Adjustable time 1 s to 1200 min
Fuse Yes (FU 2 A/ H 5*20 mm)
Degree of protection IP20
Operating temperature 0 °C to 50 °C