Victron Energy 2000VA 12V Smart voltage converter

Product detailed description

Sinusoidal fully programmable 12V/2000VA inverter with built-in Bluetooth, wireless setup and ECO mode.


Product parameters:

High starting performance
The power required to run loads such as power inverters for LED lamps, halogen lamps or power tools.
The inverter incorporates a robust toroidal transformer that has proven its reliability in Victron Energy inverters for many years.
The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.

Built-in Bluetooth technology and Victron Connect App
This inverter has built-in Bluetooth technology and is fully configurable via tablet or smartphone. This is a completely unique feature and you have the ability to set inverter parameters and monitor operation simply wirelessly.

Setting options:
- Low battery voltage alarm
- Voltage level setting to shut down and restart the inverter when the battery is low
- Dynamic disconnection from the battery when discharged: the voltage level for disconnection depends on the size of the load
- Output voltage: 210 - 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO shooting level
- Alarm relays

Monitoring:
- Input and output voltages, load levels and alarms

You can download the free VictronConnect app in the App Store or Google Play.
The app is available for download on this Victron Energy manufacturer's software page:

If you prefer to setup and monitor using a cable and PC, the inverter is equipped with a VE.Direct communication port, which you can connect to with a VE.Direct to USB cable

ECO mode
In ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it falls asleep and the inverter's own consumption is then only about 0.6W). In standby mode with very low self-consumption, the inverter will then periodically switch on for a short time (adjustable parameter, standard: every 2.5 seconds). If the load power exceeds the preset value, the inverter will switch on again. This function saves a large amount of energy that the inverter would otherwise consume for its operation.

Remote on/off
A remote on/off switch or relay contact can be connected to the two-pole connector.

Cables for connection to the battery are not included.


Technical parameters:

- continuous output power at 25°C (VA): 2000
- continuous active power at 25 °C / 40 °C (W): 1600 / 1450
- peak active power (W): 4000
- weight (kg): 13
- dimensions h x w x d (mm): 485 x 219 x 125

Technical specifications can be found in the downloadable documents below.