Victron Energy 2000VA 24V Smart voltage converter

Product detailed description

Victron Energy 24V/2000VA Smart inverter
Fully programmable 24 V/2000 VA inverter with pure sine wave, built-in Bluetooth Smart, wireless settings and ECO mode.
The Victron Energy Smart voltage converter is an efficient and reliable voltage converter built on a proven and field-tested inverter platform, but in a new design with an all-metal enclosure. It is powerful enough to power most common appliances in a car, boat, RV or home. The toroidal transformer provides high peak power surge capacity, stable voltage, frequency and high quality sine wave.


Product parameters:

Easily accessible terminals:
Installation is easier than ever because the terminals are now more accessible to the installer.

Built-in Bluetooth:
Fully configurable via tablet or smartphone, configure alarms, alarm relays, voltage interruptions, output voltage, frequency, eco mode and more directly from the VictronConnect app.
- low battery alarm
- low battery shutdown and restart levels
- dynamic shutdown: load-dependent shutdown level
- output voltage: 230 VAC ±2 %
- frequency: 50 Hz or 60 Hz
- eCO mode on/off and ECO mode sensing level
- alarm relay
- monitoring: input and output voltage, load and alarms

VE.Direct:
Using the VE.Direct port, you can connect to a computer (VE.Direct to USB interface cable required) and configure and monitor the same parameters.

Proven reliability:
The full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High starting power:
Needed to run loads such as inverters for LED bulbs, halogen bulbs, refrigerators or power tools.

ECO mode:
In ECO mode, the inverter switches to standby mode when the load drops below the preset value. In standby mode, the inverter switches on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.

Remote on/off:
A remote switch or relay contact can be connected to the two-pole connector. Alternatively, the H terminal (left) of the two-pole connector can be switched to battery plus or the L terminal (right) of the two-pole connector can be switched to battery minus.

LED diagnostics:
Status LEDs can be used to diagnose the device, see. instructions for use.

Victron Connect:
The VictronConnect application is used to monitor, control and configure the inverter. The app can be installed on your phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via a USB interface with the VE.Direct port.


Technical parameters:

- output voltage: 230 V AC ± 2% 50 Hz or 60 Hz ± 0.1%
- continuous power at 25 ºC: 2000 VA / 1600 W
- peak power: 4000 W
- max. efficiency: 94 %
- self-consumption at zero load: max. 9 W
- self-consumption at zero load in ECO mode: max. 1.3 W
- 230 V AC connection: screw terminals
- operating temperature range: -40 to +65ºC (fan-assisted cooling)
- humidity (non-condensing): max. 95%
- protection class: IP21
- weight: 13 kg
- size: 485 x 219 x 125 mm