Victron Energy 3000VA 24V intelligent voltage converter

Product detailed description

Victron Energy 24V/2000VA Smart Inverter
Fully programmable 24V/2000VA inverter with pure sine wave, built-in Bluetooth Smart, wireless setup and ECO mode.
The Victron Energy Smart voltage converter is an efficient and reliable voltage converter built on a proven and field-tested converter platform, but in a new design with an all-metal enclosure. It is powerful enough to power most common appliances in a car, boat, RV or home. The toroidal transformer provides high peak surge capacity, stable voltage, frequency and high quality sinusoid.


Product Parameters: - High efficiency electric transformer:

Easily accessible clamps:
Installation is easier than ever because the clamps are now more accessible to the installer.

Built-in Bluetooth technology:
Fully configurable via tablet or smartphone, configure alarms, alarm relays, voltage interrupts, output voltage, frequency, eco-mode and more directly from the VictronConnect app.
- Low battery voltage alarm
- Low battery shutdown and restart levels
- Dynamic shutdown: load-dependent shutdown level
- output voltage: 230 VAC ±2 %
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode shooting level
- alarm relay
- monitoring: input and output voltage, load and alarms

VE.Direct:
Using the VE.Direct port, you can connect to a computer (VE.Direct to USB cable required) and configure and monitor the same parameters.

Proven reliability:
The full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High starting performance:
Required for starting loads such as inverters for LED bulbs, halogen bulbs, refrigerators or power tools.

ECO mode:
In ECO mode, the inverter switches to standby mode when the load drops below the set value. In standby mode, the inverter switches on for a short time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.

Remote on/off:
A remote switch or relay contact can be connected to the two-pole connector. Alternatively, terminal H (left) of the two-pole connector can be switched to battery plus or terminal L (right) of the two-pole connector can be switched to battery minus.

LED diagnostics:
The status LEDs can be used to diagnose the device, see operating instructions.

Victron Connect:
The VictronConnect application is used to monitor, control and configure the inverter. The app can be installed on a phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via USB with the VE.Direct port.


Technical parameters:
- Output voltage: 230 V AC ± 2% 50 Hz or 60 Hz ± 0.1%.
- continuous power at 25ºC: 2000 VA / 1600 W
- Peak power: 4000 W
- max. efficiency: 94 %.
- self-consumption at zero load: max. 9 W
- self-consumption at zero load in ECO mode: max. 1.3 W
- Connection 230 V AC: screw terminals
- Operating temperature range: -40 to +65 ºC (fan cooling)
- Humidity (non-condensing): max. 95
- Protection class: IP21
- weight: 13 kg
- Dimensions: 485 x 219 x 125 mm