Victron Energy Smart Battery Sense, smart battery sensor, Bluetooth

Product detailed description

Smart wireless battery sensor for transmitting battery voltage and temperature information to your Smart MPPT controller (via Bluetooth with a range of up to 10 m). Increases battery charging efficiency By measuring the voltage directly at the battery power terminals, errors due to voltage loss caused by cable resistance are avoided, ensuring the correct charging voltage. For lead-acid batteries, battery temperature data is used to adjust the charging voltage: cold batteries require an increased charging voltage, while hot batteries require a reduced voltage. For lithium batteries, temperature readings are used to prevent charging if the battery temperature is too low: charging lithium batteries at temperatures near or below freezing causes permanent damage to the cells. Wireless connection The connection between the smart battery sensor and one or more chargers is wireless. VE.Smart Network technology (wireless technology based on Bluetooth Smart) is used. The transmitted information can be used simultaneously by one, two or more solar controllers connected to the same 12 V, 24 V and 48 V battery. The Smart Network is set up using the VictronConnect app. Convenient and easy installation The battery sensor is easy to install and configure. The power cable has an integrated fuse (T1A 250 V) and pre-moulded M10 lugs. The battery sensor is attached directly to the battery with self-adhesive tape. Basic specifications: Operating voltage: 8-60 V (absolute maximum voltage 65 V) Interface: Bluetooth (2402-2480 MHz), 2x M10 cable (45 cm) Fuse: T1A 250 V Dimensions: 38 x 38 x 14 mm Operating temperature max (°C): 60 Operating temperature min (°C): -10 Power supply Rated voltage (V): 12/24/48