Zdroj záložný GETI GEP501LF sinus 500W nástenný + baterie 55Ah

Product detailed description

A GETI (Emergency Power Supply) system is a device that provides a source of AC power in the event of a power grid failure. You can use the emergency power system as a backup power source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected equipment is powered directly from the mains, and in the event of an outage, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. In the event that the power supply is not restored, the emergency power system may be switched off when the voltage of the connected battery drops to around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave voltage converter based on a toroidal transformer and a fast 32-bit processor.

Caution: the contacts of the connected battery must be suitably protected against: touching persons, foreign bodies, contact with other parts of the system or short-circuiting.

Product Description:

- inverter, UPS, AVR and charger in one device
- clear colour display
- high efficiency due to toroidal transformer design
- high charging current
- protection against overload, short circuit, overload and overvoltage.


Technical parameters:

- type of backup batteries: AGM, GEL
- battery backup voltage: 12V DC
- rated capacity: 800VA
- rated power: 500W
- transformer: toroid
- input voltage: 230 V AC - 50Hz
- output voltage: 220V AC ±3% - 50Hz / pure sine wave
- charging current: 10A/ 15A/ 20A optional
- charging voltage: 13.6V ± 0.3V
- battery low voltage limit: 10.9V ± 0.3V
- low battery voltage disconnect protection: 10.2V ± 0.3V
- response time: < 4 ms
- cooling: yes
- operating temperature: 0 ~ 40°C
- relative humidity: 10%~90%
- storage temperature: -15°~45°C
- cable length to battery: 2 x 75 cm, M8
- dimension: 210x253x102 mm
- weight: 4,5kg

GETI's AGM type traction lead acid battery, specially designed for electric drives, offers high performance for powering wheelchairs, electric bicycles, electric scooters, electric scooters and other mobile machines.
It is also suitable for solar and wind power systems, UPS systems, EPS, security technology, etc.
It is a maintenance-free, hermetically sealed accumulator, allowing any working position.


Technical parameters:

- production technology: valve regulated lead acid (VRLA)
- type: GEL
- voltage: 12 V
- capacity: 55 Ah (25 °C)
- cycles: ≥ Cycles @25℃ ( DoD 80% )
- cycles: ≥ Cycles @25℃ ( DoD 50% )
- discharge current recommended: 12A
- charging current for standby: 13.75A max (0.25C)
- charging current for cyclic mode: 13.75A max (0.25C)
- standby charging voltage: 2.25 - 2.30 V / cell at 25°C
- charging voltage for cycling mode: 2.40 - 2.45 V / cell at 25°C
- charging method: CV
- self-discharge level: less than 3% / month at 25°C
- internal resistance (fully charged battery): mΩ
- connection connectors: M6
- charging temperature: -20℃~50℃
- discharge temperature: -40℃~60℃
- storage temperature: -20℃~60℃
- dimensions: 223 x 136 x 172 mm
- overall height (with end caps): 177 mm
- weight: approx. 15.0 kg

Package: 1pcs of GETI GEP501 backup power supply + 55AH lead acid battery
Weight: 20 kg