Anti-corrosion spray NANOPROTECH Auto Moto Electric 150ml

Product detailed description

Anti-corrosion spray NANOPROTECH AUTO MOTO ELECTRIC 150 ml
NANOPROTECH Electric sprays protect all electrical systems from oxidation, moisture, short circuits and leakage current. Thanks to advances in nanotechnology, they can significantly extend the life of equipment and save on maintenance, service and repair costs. In addition, they can also displace moisture from water-damaged devices, restoring their function and furthermore protecting them from further corrosion.

How do Nanoprotech Electric sprays work?

Our sprays contain nanoparticles that, when applied, will stick to the metal surface and form an impenetrable insulating barrier. This displaces moisture and prevents oxidation. In addition, it will insulate the conductors, preventing electrical current from passing through to the surrounding humid environment, thus preventing short circuits. The nanoparticles can penetrate the pre-existing corrosion layer, latching directly onto the metal surface and thus facilitating its removal. It is suitable for all metal surfaces and for low and high voltage contacts. In addition, the 300 ml volume variant, officially named GNP Electric Professional, not only delivers twice the volume, but more importantly, a professional applicator with both short and long application tubes for more practical application.

- Protects against short circuits

Electrical components treated with NANOPROTECH Electric will be insulated with a thin layer of nanoparticles that will perfectly protect them from moisture. If water gets into the treated equipment, it will not short-circuit and destroy it. In addition, it will be protected against further oxidation and work safety will be significantly increased, especially in humid environments. This will prevent serious accidents caused by electric shock.

- Protects against oxidation

When electrical equipment gets wet, oxidation occurs, which gradually degrades the equipment. However, NANOPROTECH Electric prevents this. It can even be applied to an already corroded surface and thus effectively rid it of oxidation. It is therefore ideal for treating and restoring the function of electrical devices that have reached the limits of their service life due to moisture and corrosion.

- First aid for drowned electronics

When water gets into an electrical device, it leads to its rapid destruction. Unless an untreated device is fatally damaged by water, NANOPROTECH Electric can restore its function. If a similar situation occurs to you, disassemble the device as soon as possible and treat it with NANOPROTECH Electric spray. The nanoparticles will displace moisture and preserve the surface within fifteen minutes. As a result, your electronics will continue to function as before and will also remain protected against oxidation.

- Renews contacts_mRenews contacts

In older electronics, the contacts often break, most often due to oxidation or the presence of moisture. If you encounter a similar problem, treat the broken contacts with NANOPROTECH Electric spray. The nanoparticles will help to clean and make the oxidized contacts cleaner, thus prolonging the life of the devices.

- Protects even in aggressive environments

All electrical devices are particularly at risk in chemically aggressive environments. This is particularly evident when in contact with salty moisture, which can be encountered, for example, in coastal areas or in our country during the winter months. However, chlorinated water or acid rain can also cause problems. If your instruments are at risk of corrosion, disassemble them and treat them from the inside. This will preserve them and the electrical connections will not lose their function even in harsh conditions.

Features:

- Acts as corrosion and insulation protection
- Withstands temperatures from -80 °C to +160 °C
- Acts for up to 1 year
- Consumption: approx. 50 ml per 1 m2
- Contents: 150 ml

Where to use the spray?

- RC models (control units, controllers, servos, connectors)
- Outdoor and indoor sockets
- Outdoor and indoor lighting
- Security systems, sensors and detectors
- Garden, workshop and construction equipment
- Low and high voltage distribution
- Alternators, generators, switchgear and fuse boxes
- Batteries and their contacts
- Connectors and contacts of all kinds

How to use the spray?

- Apply the spray in a well-ventilated area and preferably with protective gloves.
- Shake the spray thoroughly before application
- Spray a continuous layer (from a distance of 20-30 cm) on the designated surface or apply directly to the area to be treated
- Wait 10-15 minutes after application and then wipe off the excess solution