AVANSA CP 15-1.5 - DHW circulation pump for drinking water
Code: AVANSA CP 15-1.5Related products
Avansa 110 E, thermostat for pumps and boiler rooms The AVANSA 110-E thermostat is...
Avansa 500 W+ Circulator Power Supply Akuma VORTEK 12V 46Ah 450A Avansa...
=LEFT(G27,300)
Product detailed description
AVANSA CP 15-1.5 - DHW circulation pump for drinking water
Circulation pump intended for the circulation of domestic hot water. Construction improved by technology with
permanent magnets on the rotor, brass body and ceramic shaft enables efficient,
economical and trouble-free operation. The pump is usually installed before the boiler or hot water tank.
Technical parameters:
Max. flow rate (Qmax - l/min): 6.8 l/min
Max. displacement (Hmax - m): 1.7 m
Max. pressure (bar): 10 bar
Motor power (W): 25 W
Power supply (V): 220V/50Hz
Suction DN: 15 mm
DN displacement: 15 mm
Construction length: 85 mm (suction-discharge)
Connection thread: G 1/2"
Temperature range: 5 °C – 95 °C
Advantages:
- massive construction,
- silent operation,
- problem-free operation,
- simple installation,
- pump equipped with a cable with a plug
Additional parameters
| Category: | Circulation pumps Avansa |
|---|---|
| Warranty: | 2 roky |
Avansa AUTO 25/6/130 circulation pump The Avansa AUTO 25/60 130mm...
Running pump for all water distribution in the house IBO OHI 25/40-180 The IBO...
Backup power supply for Avansa 700 W circulators Technical data Maximum...
Pump fitting, IVAR.SC, size: 1" x 6/4" PN 16, T = +110 °C internal thread - FF...
Avansa 110 E, thermostat for pumps and boiler rooms The AVANSA 110-E thermostat is...
Additional thermostat AVANSA TH 2A for circulation pump serves to switch on...
Solar preinsulated stainless steel pipe (bellows, double pipe) with insulation and...
ALPEX-GAS thread sealant, IVAR.LOCTITE 55, packing: 160 m, winding ...
The 1/2" x 1/4" MF brass threaded reduceris the most commonly used connection for...
Discussion
Be the first who will post an article to this item!
