Reducer 1/2" x 1/4" MF

Product detailed description

Brass threaded reducers are essential components in heating and plumbing systems where pipe sizes need to be adjusted. This type of fitting is frequently used in residential and commercial heating installations, especially when connecting smaller-diameter components to larger-diameter supply lines. Installers working with steel pipe systems often use these fittings to adapt pipe sizes at critical points such as boiler inlets, valve connections, and manifold junctions. The transition from 1/2 inch to 1/4 inch is a common requirement in systems where space constraints or equipment specifications demand a reduction in pipe size without compromising flow efficiency.

When selecting and installing a reducer, it is important to ensure that the thread type and dimensions match the connected components. The IVAR 2520027 is designed for use in systems where a secure, leak-free connection is required between dissimilar pipe sizes. It is particularly suited for applications involving steel pipes, where the fitting's brass construction provides durability and resistance to corrosion.

Technical parameters

Weight	0.1 kg
Code	2520027
Brand	IVAR

The technical parameters of the IVAR 2520027 are critical for proper sizing and selection. The 1/2 inch to 1/4 inch reduction allows for a smooth transition between pipe sizes while maintaining system integrity. These dimensions are essential for ensuring compatibility with existing pipe layouts and components. The fitting's weight and material are also relevant for handling and installation in tight spaces.

Installation and connection

To install the IVAR 2520027, begin by ensuring that the threads on both the reducer and the connected pipes are clean and free of debris. Apply a suitable thread sealant or tape to the male threads before screwing the fitting into place. The reducer connects to a 1/2 inch pipe on one end and a 1/4 inch pipe on the other. It is important to check that the threads engage fully and that the fitting is tightened to the manufacturer's recommended torque. Common installation mistakes include over-tightening, which can damage the threads, and using an incorrect thread type, which can lead to leaks or poor performance.

Compatibility and accessories

The IVAR 2520027 is compatible with a range of standard pipe fittings and components used in heating and plumbing systems. It is typically used in conjunction with valves, meters, and other equipment that require a 1/4 inch connection. When installing this reducer, it is important to ensure that the connected components are also compatible with brass fittings. No additional accessories are required for basic installation, but thread sealant or tape may be used to enhance the seal and prevent leaks.

Technical background for designers

The IVAR 2520027 operates as a passive component that allows for a controlled reduction in pipe size. The brass material provides good thermal conductivity and resistance to corrosion, making it suitable for use in both hot and cold water systems. The fitting's design ensures a smooth flow transition between the larger and smaller pipe sections, minimising turbulence and pressure loss. The integration of this reducer into a system depends on the overall layout and the need for size adjustments at specific points. The service life and efficiency of the fitting are influenced by the quality of the installation, the operating conditions, and the compatibility of the connected components.

Service and operation

The IVAR 2520027 requires minimal maintenance under normal operating conditions. Regular inspections should be carried out to check for signs of wear, corrosion, or leakage at the connection points. If any issues are detected, the fitting should be disassembled and inspected for thread damage or sealant degradation. No specific service intervals are provided for this component, but it is recommended to perform routine checks during system maintenance. Proper installation and use of compatible components will help ensure long-term performance and reliability.

Frequently asked questions

Can the IVAR 2520027 be used with copper pipes?
Yes, the fitting is compatible with copper pipes provided that the thread type and dimensions match the 1/2 inch and 1/4 inch connections.

Is it suitable for high-pressure heating systems?
Yes, the brass construction and threaded design make it suitable for use in standard heating systems with typical operating pressures.

Can it be used in both hot and cold water systems?
Yes, the material and design allow for use in both hot and cold water applications without compromising performance.

What is the maximum operating temperature for this reducer?
According to the manufacturer's technical data sheet, the fitting is suitable for use within the standard temperature range for heating and plumbing systems.