Backup power supply GETI GEP301 sine 300W wall mounted + 28Ah battery

Product detailed description

A GETI (Emergency Power Supply) system is a device that provides a source of AC power in the event of a power grid failure. You can use the emergency power system as a backup power source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected equipment is powered directly from the mains, and in the event of an outage, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. In the event that the power supply is not restored, the emergency power system may be switched off when the voltage of the connected battery drops to around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave voltage converter based on a toroidal transformer and a fast 32-bit processor.

Please note: Only a qualified person may install the system! The contacts of the connected battery must be suitably protected against: contact with persons, foreign bodies, contact with other parts of the system or short-circuiting.

Product Description:

- inverter, UPS, AVR and charger in one device
- clear colour display
- high efficiency due to toroidal transformer design
- high charging current
- protection against overload, short circuit, overload and overvoltage.


Technical parameters:

- type of backup batteries: AGM, GEL
- battery backup voltage: 12V DC
- rated capacity: 500VA
- rated power: 300W
- transformer: toroid
- input voltage: 230 V AC - 50Hz
- output voltage: 230V AC ±3% - 50Hz / pure sine wave
- charging current: 5 A /10 A optional
- charging voltage: 13.6V ± 0.3V
- battery low voltage limit: 11V ± 0.3V
- low battery disconnect protection: 10.5V ± 0.3V
- response time: < 4 ms
- cooling: yes
- operating temperature: 0 ~ 40°C
- relative humidity: 10%~90%
- storage temperature: -15°~45°C
- cable length to battery: 2 x 75 cm, M8
- dimension: 210x253x102 mm
- weight: 4kg


Lead-acid battery

Technical parameters:

- production technology: valve regulated lead acid (VRLA)
- type: AGM
- voltage: 12 V
- capacity: 28 Ah
- dimensions: 166 x 175 x 125 mm
- Overall height (with end caps): 125 mm
- connection (terminals): flat connector for 5.5 mm screw
- weight: approx. 8.3 kg


Package: 1pcs of GETI GEP301 backup power supply + 28Ah lead acid battery
Weight: 12,5 kg