Backup power supply GETI GEP501 sine 500W wall mounted + battery 120Ah

Product detailed description

A GETI (Emergency Power Supply) system is a device that provides a source of AC power in the event of a power grid failure. You can use the emergency power system as a backup power source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected equipment is powered directly from the mains, and in the event of an outage, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. In the event that the power supply is not restored, the emergency power system may be switched off when the voltage of the connected battery drops to around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave voltage converter based on a toroidal transformer and a fast 32-bit processor.

Please note: Only a qualified person may install the system! The contacts of the connected battery must be suitably protected against: contact with persons, foreign bodies, contact with other parts of the system or short-circuiting.

Product Description:

- inverter, UPS, AVR and charger in one device
- clear colour display
- high efficiency due to toroidal transformer design
- high charging current
- protection against overload, short circuit, overload and overvoltage.


Technical parameters:

- type of backup batteries: AGM, GEL
- battery backup voltage: 12V DC
- rated capacity: 800VA
- rated power: 500W
- transformer: toroid
- input voltage: 230 V AC - 50Hz
- output voltage: 220V AC ±3% - 50Hz / pure sine wave
- charging current: 10A/ 15A/ 20A optional
- charging voltage: 13.6V ± 0.3V
- battery low voltage limit: 10.9V ± 0.3V
- low battery voltage disconnect protection: 10.2V ± 0.3V
- response time: < 4 ms
- cooling: yes
- operating temperature: 0 ~ 40°C
- relative humidity: 10%~90%
- storage temperature: -15°~45°C
- cable length to battery: 2 x 75 cm, M8
- dimension: 210x253x102 mm
- weight: 4,5kg

The gel type lead-acid battery Geti is particularly suitable for solar and wind power systems and caravans, but also as a battery replacement for UPS backup systems, back-up power supplies, EZS, EPS, telecommunications, mobile warning and signalling applications, etc. It is a maintenance-free, hermetically sealed battery that allows any working position.


Technical parameters:

- production technology: valve regulated lead acid (VRLA)
- type: GEL
- voltage: 12 V
- capacity: 120 Ah
- dimensions: 407 x 177 x 222 mm
- overall height (with end caps): 225 mm
- weight: approx. 35 kg
- internal resistance (fully charged battery): 4 mΩ
- self-discharge process <3%, 25°C

Packing: 1 pc of GETI GEP501 backup power supply + 120AH lead acid battery
Carton weight: 39 kg