Ball valve 1" FF,P

Product detailed description

Ball valves are essential components in mechanical systems where reliable shut-off is required. This model is commonly used in domestic and commercial heating systems, water supply lines, and irrigation circuits. Installers typically encounter these valves in situations requiring frequent manual operation or emergency isolation. The valve operates by rotating a hollow ball within the body to allow or block flow. Its simple design ensures minimal maintenance while maintaining tight sealing properties.

The 1 inch connection size makes this valve suitable for medium to large diameter piping applications. The fixed female pipe thread connection requires precise alignment during installation to prevent leakage. The brass construction provides good corrosion resistance for use with water-based media. The operating principle relies on a quarter-turn handle mechanism that positions the ball to either allow full flow or create a metal-to-metal seal.

Technical parameters

EAN	8594013121750
Weight	0.25 kg
Code	PR_7541
Brand	Aquart

Installation and connection

Before installation, verify the pipe thread type matches the valve's fixed female thread. Clean the thread surfaces to remove debris that could compromise the seal. Apply thread sealant according to manufacturer recommendations. Tighten the connection using a wrench, taking care not to overtighten which can damage the valve body. Ensure the valve is installed in a position that allows easy access for operation and inspection. Check for alignment with adjacent pipe components to avoid stress on the valve body.

Compatibility and accessories

This valve is compatible with standard 1 inch threaded piping systems. For installation, ensure appropriate thread sealant and pipe cutting tools are available. When integrating into a larger system, verify compatibility with upstream and downstream components such as pressure regulators and filters. Related products include matching pipe fittings and sealing compounds.

Technical background for designers

The valve operates using a solid metal ball with a bore that aligns with the flow direction. The ball rotates within a brass body to control flow. The metal-to-metal sealing action ensures long-term reliability when used with non-abrasive media. The design allows for quick operation with minimal torque required. System designers should consider the valve's pressure rating and ensure it meets the requirements of the application. The compact size allows for installation in confined spaces.

Service and operation

Periodic inspection is recommended to ensure smooth operation of the handle and absence of leaks. Check for signs of corrosion around the body and handle. If resistance is encountered during operation, disassemble and clean the internal components if necessary. The valve requires no scheduled maintenance beyond visual inspections. In case of suspected failure, isolate the system and replace the valve following standard procedures.

Frequently asked questions

Can this valve be used with hot water systems?
Yes, the brass construction is suitable for hot water applications within standard temperature ranges.

Is this valve suitable for gas applications?
Not specified in the technical documentation, consult the manufacturer's specifications for gas suitability.

What tools are needed for installation?
A pipe wrench and thread sealant are required for proper installation.

Can this valve be installed vertically?
Yes, the valve can be installed in any orientation depending on system requirements.