Battery LiFePO4 12,8V 50Ah VOLT
Code: TI_04250934Product detailed description
LiFePO₄ (lithium iron phosphate) batteries with built-in BMS are characterised by their very low weight and high number of operating cycles - their lifetime is approximately 6000 cycles at DoD 60%.
High cycling and very low self-discharge make LiFePO₄ batteries ideal for both emergency power systems and off-grid installations.
Their light weight allows them to be used in mobile installations - in vehicles (caravans, food trolleys) and on boats.
A built-in BMS system controls the charging and discharging processes and enables long-term storage without loss of rated capacity.
USING LiFePO₄ BATTERIES
Emergency power systems
Off-grid installation
Installation in vehicles - caravans, refreshment vans
Boat wiring - power supply for electronic equipment, lighting, household appliances ⚠️ using hermetic battery cover only
IMPORTANT INFORMATION AND RECOMMENDATIONS
When using a LiFePO₄ battery to power electric motor equipment (e.g. propeller motors), it is mandatory to use a DC fuse on the (+) circuit of the battery - with a value no greater than the maximum load current indicated on the cover.
Loading the battery with a starting current that can be up to 5-10 times the rated operating current (e.g. motors, compressors, refrigerators, air conditioners) can cause permanent damage to the LiFePO₄ battery with BMS , which is not covered by the warranty.
Charge the battery only with a charger designed for LiFePO₄ batteries
TECHNICAL DATA
Rated voltage:
12,8 V
Rated capacity:
50AH
Voltage range: 50Ah:
10.8 V ~ 14.4 V
Maximum charging current:
50A
Maximum discharge current: 50A:
50A
Durability:
3000 cycles (100% DoD)
Durability:
4500 cycles (80% DoD)
Durability:
6000 cycles (60% DoD)
Height:
170 mm
Width: 170 mm
165 mm
Length:
197mm
Scales:
Weight: 5.6 kg +/- 3%
Additional parameters
| Category: | LiFePO4 battery |
|---|---|
| EAN: | 5904100452057 |
| EAN: | 5904100452057 |
Discussion
Be the first who will post an article to this item!
