Connector 2 AC output for Antik Water Heater V3

Product detailed description

Original connector for connection to the second AC output of the ANTIK Water Heater PWH 01 V3. Thanks to the connector attached to the controller (hidden under the cover), a second device can then be connected to the controller via the connector. Function description 2x AC output of the ANTIK WATER HEATER V3 - The solar inverter switches the heating to the secondary output if the water temperature on the external sensor has reached the set temperature for PV heating or even if the circuit has been disconnected by the thermostat (the device detects zero current). - The second output will remain on until the temperature at the external sensor falls 5 degrees below the set temperature for PV. If zero current is detected at the time of switching to the second output (the output is not connected) the device will switch back to the first output and will not switch to the second output. The grid backup function on the second output is not supported.