Cyclone sediment filters for hot water

Cyclone dewatering filters for hot water are designed to remove suspended solids and mechanical impurities from hot water systems. These filters operate using a cyclonic separation principle, where water is forced through a spiral chamber that separates heavier particles from the flow. They are commonly used in heating systems, hot water circulation loops, and industrial water treatment applications to protect pumps, heat exchangers, and valves from sediment buildup.

Each unit features a removable stainless steel filter insert that can be cleaned manually. A dedicated desilting mechanism allows for the removal of collected debris. For optimal performance, these filters should be connected to a drainage or sewage system to allow for regular emptying of collected waste.

How to choose

• Select the appropriate inlet size (e.g., 1/2" F, 3/4" F, 1" F) based on the pipe diameter and flow rate of the system.
• Ensure compatibility with hot water temperatures and system pressure by checking the materials and construction of the filter body.
• Consider the filtration fineness (e.g., 500 µm) to match the level of impurity removal required for the application.
• Verify that the filter can be manually desilted and that the cleaning process is accessible and straightforward for regular maintenance.

Frequently asked questions

Can these filters be used in closed-loop hot water systems?
Yes, provided they are installed at a low point in the system where sediment naturally accumulates and are connected to a drainage system for waste removal.

What is the maximum operating temperature for these filters?
These filters are suitable for hot water systems, but the exact temperature limit depends on the materials used in the filter body and gaskets. Always refer to the manufacturer’s specifications.