Cyclone drip filter 4" - for hot water - 1/2 "F; 500 µm - action IVAR.NANOHOT

Product detailed description

Cyclone drip filters are essential components in hot water systems where mechanical impurities can accumulate and affect system performance. These filters are commonly installed in residential and commercial buildings with central heating systems, domestic hot water circuits, and industrial water heating applications. Installers often encounter issues such as sediment buildup, scale formation, and reduced flow efficiency, which this filter helps to mitigate. The Cyclone drip filter operates by combining mechanical filtration with a cyclonic separation effect to remove particulate matter from the water stream.

Proper installation of the filter ensures that it functions effectively within the system. It is typically positioned in the main hot water line, upstream of sensitive components such as heat exchangers, pumps, or thermostatic valves. The filter is designed for integration into systems where regular manual cleaning is feasible, making it suitable for systems with moderate to high levels of particulate contamination.

Technical parameters

Material	Filter head brass, special plastic container
Operating temperature	+90 °C
Nominal pressure	PN 6
Dimensions	Height 190 mm, ø 84 mm
Code	IVANANOHOT12
Brand	IVAR

The operating temperature of +90 °C and PN 6 pressure rating make this filter suitable for standard hot water systems. The 500 µm porosity of the stainless steel insert ensures that larger particles are captured while allowing sufficient flow for most applications. The PN 6 rating indicates that the filter can handle typical pressures found in domestic and light commercial hot water systems. These parameters are critical for ensuring compatibility with existing piping and system design.Installation and connection The filter connects to the system via a 1/2 inch female thread, making it compatible with standard copper or plastic piping systems. The installation procedure involves cutting the pipe, fitting the filter in the correct orientation (with the arrow indicating flow direction), and securing it with appropriate fittings. It is important to ensure that the filter is installed in a location that allows for easy access during maintenance. A common mistake is neglecting to connect the filter to the drainage system, which is necessary for the manual descaling function. The filter should be installed in a vertical position to ensure proper operation of the cyclonic separation mechanism.Compatibility and accessories This filter is compatible with standard hot water systems and can be used in conjunction with other IVAR filtration products. It requires a connection to a drainage system to allow for the discharge of collected impurities and scale. No additional accessories are required for basic operation, but installers should verify that the existing piping system supports the 1/2 inch thread connection. The filter is not designed for use with chemical descaling agents and should be cleaned manually using the built-in mechanism.Technical background for designers The filter operates using a combination of mechanical filtration and cyclonic separation. The stainless steel insert captures larger particles, while the cyclonic effect enhances the removal of finer particulate matter. The brass filter head provides durability and resistance to corrosion, while the special plastic container ensures lightweight construction and ease of handling. The filter is designed for integration into closed-loop hot water systems and is suitable for systems with moderate to high particulate loads. The service life and efficiency of the filter depend on the frequency of manual cleaning and the quality of the water being filtered.Service and operation Regular maintenance is required to ensure optimal performance. The stainless steel filter insert should be manually cleaned using the built-in mechanism to remove accumulated impurities and scale. The frequency of cleaning depends on the water quality and system usage, but no specific service intervals are provided in the technical data. During maintenance, installers should check for signs of wear on the filter housing and ensure that the drainage connection is functioning correctly. A visual inspection of the filter insert for clogging or damage is also recommended.Frequently asked questions

Can the filter be connected to a closed-loop hot water system?
Yes, the filter is suitable for closed-loop hot water systems provided the system operates within the specified temperature and pressure limits.

Is the filter insert replaceable?
The stainless steel filter insert is washable and reusable. It is not designed for replacement with a new insert.

Can the filter be used with chemical descaling agents?
No, the filter is not designed for use with chemical descaling agents. It should be cleaned manually using the built-in mechanism.

What is the maximum operating temperature?
The filter is rated for a maximum operating temperature of +90 °C, making it suitable for standard hot water systems.

Documents for download

• CSTL_IVAR.NANOHOT (PDF)
• SKTL_IVAR.NANOHOT czver (PDF)