DAB.EVOSTA2 SAN - electronic circulation pumps for hot water systems

ELECTRONIC CIRCULATION PUMPS FOR HOT WATER SYSTEMS

DAB.EVOSTA2 SAN

Circulating pumps EVOSTA2 SAN are suitable for hot water circulation in small spaces of domestic systems. Self-protected synchronous ball rotor motor requiring only one sealing ring between motor and pump body. Easy to clean or replace. Brass pump body with internal thread R 1/2" (G 1/2") in version R or with non-return valve and insulation supplied as standard in version V for connector with external thread 1/2" (G 1"). Operating range: from 0 to 0.6 m3 /h with a discharge of up to 1.1 m

• Liquid temperature range: from 2 °C to + 75 °C
• Maximum working pressure: 10 bar (1000 kPa)
• Degree of protection: IP42
• Insulation class: II
• Installation: with a horizontal position of the motor shaft
• Voltage: 1 x 115-230 V/50/60 Hz
• Pumped liquid: clean without solid substances and mineral oils, without viscosity, chemically neutral with properties close to water (max. glycol content 30%)