DAB.JET, JETCOm, JETINOX - self-priming pumps

This category includes self-priming pumps from DAB’s JET, JETCOM, and JETINOX series, designed for clean water applications in heating, plumbing, and irrigation systems. These pumps operate with a built-in ejector and a single multifunctional impeller, enabling self-priming without the need for manual filling. They are suitable for transferring non-aggressive, non-viscous, and non-crystallizing liquids with properties similar to water. The operating range spans from 0.4 to 10.5 m³/h, with a maximum head of 62 m. Liquid temperatures must remain within 0°C to +35°C for domestic use and up to +40°C for other applications.

How to choose

Select the body material based on the environment: cast iron (JET), stainless steel (JETINOX), or technopolymer (JETCOM).
Verify the required flow rate and head to match the pump’s operating range and ensure compatibility with the system.
Check the motor type (single-phase or three-phase) and ensure appropriate overload protection is available for three-phase models.
Confirm the inlet and outlet connections match the system’s pipe sizes and thread types.
Ensure the pump’s insulation class (F) and protection rating (IP44) meet the installation environment’s requirements.